630711
119
Zoom out
Zoom in
Previous page
1/150
Next page
Troubleshooting
115
5
White Spots on black text
and graphics at 94 mm
(3.71 in.) intervals
Black Spots at 94 mm
(3.71 in.) intervals
If the problem is not solved after printing a few pages, the drum unit may have
foreign material, such as glue from a label, stuck on the drum. Clean the drum
unit. (See Cleaning the drum unit on page 87)
The drum unit may be damaged. Put in a new drum unit. See Replacing the drum
unit on page 79.
Black toner marks across the
page
The drum unit may be damaged. Put in a new drum unit. See Replacing the drum
unit on page 79.
The toner cartridge may be damaged. Put in a new toner cartridge. See
Replacing the toner cartridge on page 71.
Make sure that you use paper that meets our specifications. See Acceptable
paper and other print media on page 3.
If you use label sheets for laser printers, the glue from the sheets may sometimes
stick to the OPC drum surface. Clean the drum unit. See Cleaning the drum unit
on page 87.
Do not use paper that has clips or staples because they will scratch the surface
of the drum.
If the unpacked drum unit is in direct sunlight or room light, the unit may be
damaged.
Black lines down the page
Printed pages have toner stains
down the page.
Clean the primary corona wire inside the drum unit by sliding the green tab. See
Cleaning the corona wire on page 85.
Make sure the green tab of the primary corona wire is at the home position (a).
The drum unit may be damaged. Put in a new drum unit. See Replacing the drum
unit on page 79.
The toner cartridge may be damaged. Put in a new toner cartridge. See
Replacing the toner cartridge on page 71.
The fuser unit may be contaminated. Call your dealer or Brother Customer
Service.
Examples of poor print
quality
Recommendation
94 mm
(3.71 in.)
94 mm
(3.71 in.)
94 mm
(3.71 in.)
94 mm
(3.71 in.)
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-2242D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-2242D in the language / languages: English as an attachment in your email.

The manual is 8,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-2242D

Brother HL-2242D Installation Guide - English - 2 pages

Brother HL-2242D Installation Guide - German - 2 pages

Brother HL-2242D User Manual - German - 153 pages

Brother HL-2242D Installation Guide - Dutch - 2 pages

Brother HL-2242D User Manual - Dutch - 152 pages

Brother HL-2242D Installation Guide - French - 2 pages

Brother HL-2242D User Manual - French - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info