1869
54
Zoom out
Zoom in
Previous page
1/109
Next page
Control panel
3 - 11
3
Network factory default setting (For HL-2070N)
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
1Turn off the printer.
2Make sure that the front cover is closed and the power cord is plugged in.
3Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the
Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and
Paper LEDs are off.
4Press the Go button six times. Make sure that all the LEDs light up to indicate the print server has been
reset to its default factory settings.
Network factory default setting with APIPA protocol disabled (For HL-2070N)
If you wish to reset the print server back to its factory default settings with APIPA protocol disabled, please
follow these steps:
1Turn off the printer.
2Make sure that the front cover is closed and the power cord is plugged in.
3Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the
Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and
Paper LEDs are off.
4Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has
been reset to its default factory settings.
Note
For more information of APIPA, see the Network User’s Guide or visit http://solutions.brother.com
You can also disable the APIPA protocol using Web browser, BRAdmin Professional or Web
BRAdmin.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-2070N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-2070N in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-2070N

Brother HL-2070N Installation Guide - English - 30 pages

Brother HL-2070N Installation Guide - German - 30 pages

Brother HL-2070N User Manual - German - 104 pages

Brother HL-2070N Installation Guide - Dutch - 32 pages

Brother HL-2070N User Manual - Dutch - 105 pages

Brother HL-2070N Installation Guide - French - 30 pages

Brother HL-2070N User Manual - French - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info