4933
42
Zoom out
Zoom in
Previous page
1/123
Next page
1-34
Test Print Mode
The printer has the following test print modes. Follow these steps:
1.
Make sure that the front cover is closed.
2.
Hold down the control panel button and turn on the power switch. Keep the button
depressed until the Drum LED comes on.
The Drum LED illuminates to indicate that the printer is in the test print mode.
3.
Release and then press the button again to execute the test print or hold down the
button to select another option as shown in the table below and release the button to
execute the selected option.
LED Lit Choice Function
Drum
Test sample page The printer prints a test sample page.
The printer returns to the ready status after
printing.
Ready
Print Config &
Print Fonts I
The printer prints the current configuration
of the printer and a list of the internal fonts.
The printer returns to the ready status after
printing.
Alarm
Factory Reset The printer is restored to the factory setting
and permanent fonts and macros are
cleared.
The printer returns to the ready status after
printing.
Data
Hex Dump Print The printer can print data as hexadecimal
values so that you can check data errors and
problems. To exit from this mode, you
have to turn off the printer.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-1030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-1030 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-1030

Brother HL-1030 Installation Guide - English - 16 pages

Brother HL-1030 Installation Guide - German - 16 pages

Brother HL-1030 User Manual - German - 123 pages

Brother HL-1030 Installation Guide - Dutch - 16 pages

Brother HL-1030 User Manual - Dutch - 122 pages

Brother HL-1030 User Manual - French - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info