Manual Brother GS3700 (page 38 of 48) (English)

613416

Zoom out

Zoom in

1/48

SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

———————————————————————————————————————

—————

1 Buttonhole fine-adjustment screw

2 Left side

3 Buttonhole appearance

If the left side is too open, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“–” direction.

If the left side is too tight, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“+” direction.

• This adjustment ensures both sides of the

buttonhole are the same.

Sewing buttons

Measure the distance between the

buttonholes and mark the fabric. Then

adjust the stitch width so that it is the

same as the distance between the holes in

the button.

Turn off the machine.

Change the foot to the button sewing foot

“M”.

Place the darning plate on the needle

plate.

Turn on the machine.

Put a button between the foot and the

fabric and make sure that the needle enters

the holes without hitting the button. If it

hits, see step

At a slow speed, sew about 10 stitches.

CAUTION

Pull the upper thread at the end of the

stitching to the wrong side of the fabric,

and then tie it with the bobbin thread.

X Use scissors to cut the upper thread and

the bobbin thread at the beginning of the

stitching.

Stitch

Name

Pattern

Stitch

Length

[mm

(inch)]

Stitch

Width

[mm

(inch)]

Foot Other

Zigzag

Stitch

(1/64)

Any

Button

Sewing

Foot

“M”

Darning

Plate

● Make sure the needle does not hit the

button during sewing. The needle may

break and you may be injured.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother GS3700 in the language / languages: English as an attachment in your email.

The manual is 18,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother GS3700 Manual

Product: