613413
39
Zoom out
Zoom in
Previous page
1/48
Next page
38
5
1
Baste the cut design to the fabric.
2
Carefully sew around the edge of the
design with a zigzag stitch.
OPTIONAL ACCESSORIES
Using the blind stitch foot
This foot comes in handy not only for stretch blind hem
stitching, but also for sewing fabric edges and seams.
When edge stitching
1
Turn off the machine.
2
Attach the blind stitch foot.
Turn on the machine.
3
Position the needle the distance you want
the stitch to be from the edge of the
fabric, and then lower the needle in that
position.
4
Turn the foot guide screw and carefully
adjust to guide the fabric.
1 Screw
2 Guide
When sewing seams
1
Turn off the machine.
2
Attach the blind stitch foot.
Turn on the machine.
3
Set the pattern selection dial to the
Straight Stitch (Center Needle Position).
Align the foot guide with the needle
position.
4
Set the pattern selection dial to the Zigzag
Stitch (1.5 mm, 3.5 mm or 5 mm) with the
desired width.
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch Width
[mm (inch)]
Straight Stitch
(Center Needle
Position)
Any
Zigzag Stitch
1-4
(1/16-3/16)
1.5 (1/16)
Zigzag Stitch
1-4
(1/16-3/16)
3.5 (1/8)
Zigzag Stitch
1-4
(1/16-3/16)
5 (3/16)
Stretch Blind
Hem Stitch
F-1.5
(1/64-1/16)
3 (1/8)
3
4
5
6
9
1
1
2
2
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother GS2510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother GS2510 in the language / languages: English as an attachment in your email.

The manual is 13,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info