718830
51
Zoom out
Zoom in
Previous page
1/72
Next page
49
3
Your stitch pattern may sometimes turn out poorly,
depending on the type or thickness of fabric, the
stabilizer material used, sewing speed, etc. If your
sewing does not turn out well, sew trial stitches using
the same conditions as the real sewing, and adjust the
stitch pattern as shown below.
Memo
The character stitches “034” (No. 31 + No. 34+ No.
35) are used for making adjustments.
a
Attach monogramming foot “N”.
For details, refer to “Replacing the presser foot”
(page 22).
b
Combine the character stitches “034” (No. 31 +
No. 34 + No. 35).
For details, refer to “Combining characters”
(page 46).
When you have finished creating the
combination, the following is displayed on the
LCD.
c
Sew the combination of characters and check
how it turns out.
For details, refer to “Sewing the character
stitches” (page 48).
A: Correctly sewn
(with proper spaces between characters)
B: Bunched or shapeless
(There is no space between characters.)
C: Overstretched
(The stitch “0” has a gap.)
If the pattern you sewed does not look like A, use
the following steps to adjust the stitches.
d
Select No. 59 (for making adjustments).
The LCD goes into the stitch adjustment
mode. The total number of combined
characters (1) changes to “--“.
e
Adjust the character stitches by pressing
(stitch length adjustment key).
Each press of “+” or “-” side of (stitch
length adjustment key) widens or narrows the
stitches.
a No. for making adjustments
b The stitch adjustment level
c Widens the stitches
d Narrows the stitches
If the pattern is bunched (B)
Press the “+” side of (stitch length
adjustment key) to widen the stitch.
If the pattern is overstretched
(The stitch “0” has a gap.) (C)
Press the “-” side of (stitch length
adjustment key) to narrow the stitch.
Memo
The stitch adjustment level can be set between -9 and 9.
The setting is saved in memory even if you turn off
the machine.
f
Sew the characters “034” again.
Memo
You can sew when you are in the stitch adjustment mode.
If the stitch pattern still comes out poorly, adjust
the stitch again. Adjust the stitch until the stitch
pattern comes out correctly.
g
After you have finished adjusting the pattern,
press the utility stitch key once, and then press
the character stitch key.
The display returns to the normal character
stitching mode.
ADJUSTING STITCHES
(For models equipped with
character stitches)
N
N
51


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-fs70wts

Reset search

  • Replacement Bobbin case for brother sewing machine Submitted on 22-9-2021 at 18:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS70WTs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS70WTs in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS70WTs

Brother FS70WTs User Manual - German - 72 pages

Brother FS70WTs User Manual - Dutch - 72 pages

Brother FS70WTs User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info