718827
11
Zoom out
Zoom in
Previous page
1/72
Next page
9
1
Note
When the foot controller is plugged in, the start/
stop button cannot be used to start sewing (only for
models equipped with the start/stop button).
a
Slide the sewing speed controller to select the
desired sewing speed.
a Sewing speed controller
The speed set using the sewing speed
controller is the foot controller’s maximum
sewing speed.
Normally, the sewing machine is set to leave the needle in the
fabric when sewing is stopped. Instead, the machine can be set
to leave the needle raised when sewing is stopped.
a
Turn off the sewing machine.
b
Hold down the “–” side of (a) and turn on the
sewing machine.
c
After turning on the sewing machine, release the
“–” side of (
a).
The needle stop position changes to the raised
position.
Memo
Perform the same operation to change the
needle stop position to the lowered position.
Normally, the straight stitch (left needle position) is
automatically selected when the sewing machine is
turned on. The initial needle position can be changed
to the straight stitch (center needle position).
a
Turn off the sewing machine.
b
Hold down the “+” side of (b) and turn on
the sewing machine.
c
After turning on the sewing machine, release the
“+” side of (
b).
The initial needle position changes to the
center needle position.
Memo
The specified initial needle position is maintained
even after the machine is turned off.
Perform the same operation to change the initial
needle position to the left needle position.
When the sewing machine is purchased, it is set to
beep each time a key is pressed. This setting can be
changed so that the machine does not beep.
a
Turn off the sewing machine.
b
Hold down the “–” side of (c) and turn on
the sewing machine.
c
After turning on the sewing machine, release the
“-” side of (c).
The machine is now set so that it will not
beep.
Memo
Perform the same operation to change the setting
so that machine beeps.
Sewing speed controller
(for models equipped with
the start/stop button)
Changing the needle stop position
Changing the initial needle
position
Cancelling the operation beep
(for models equipped with the
operation beep)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS60S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS60S in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS60S

Brother FS60S User Manual - German - 72 pages

Brother FS60S User Manual - Dutch - 72 pages

Brother FS60S User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info