631194
100
Zoom out
Zoom in
Previous page
1/108
Next page
98
APPENDIX
List of symptoms
Before sewing
Symptom Possible cause How to put it right Reference
The needle
threader can not
be used. (For
models equipped
with the needle
threader lever.)
You have not moved the needle
holder to its highest position.
Raise the needle either by turning the
handwheel toward you
(counterclockwise) so that the mark
on the wheel points up or by pressing
(needle position button) once or
twice.
page 23
The needle is incorrectly installed. Correctly install the needle. page 30
The sewing light
does not come
on.
The sewing lamp is damaged.
Contact your retailer or the nearest
authorized service center.
The machine is not turned on. Turn on the machine. page 12
Bobbin thread
does not wind
neatly on the
bobbin.
The thread is not passed through the
bobbin-winding thread guide
correctly.
Correctly pass the thread through the
bobbin-winding thread guide.
page 17
Bobbin spins slowly. (for models
equipped with the sewing speed
controller.)
Move the sewing speed controller to
the right (so that the speed will be
fast).
page 19
The thread that was pulled out was
not wound onto the bobbin correctly.
(For models equipped with the fast
bobbin winding system.)
Wind the thread that was pulled off
round the bobbin five or six times
clockwise.
page 18
The thread does
not pass through
the eye of the
needle. (For
models equipped
with the needle
threader lever.)
You have not moved the needle
holder to its highest position.
Raise the needle either by turning the
handwheel toward you
(counterclockwise) so that the mark
on the wheel points up or by pressing
(needle position button) once or
twice.
page 23
The needle is incorrectly installed. Correctly install the needle. page 30
The needle
threader lever
does not lower to
the correct
position. (For
models equipped
with the needle
threader lever.)
The needle has not been raised to the
correct position.
Press the needle position button. page 23
While winding
the bobbin, the
bobbin thread
was wound
below the bobbin
winder seat.
You have not wound the bobbin
thread properly.
After removing the thread wound
below the bobbin winder seat, wind
the bobbin correctly.
page 15
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS100 in the language / languages: English as an attachment in your email.

The manual is 9,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS100

Brother FS100 User Manual - English, German - 104 pages

Brother FS100 User Manual - Dutch - 104 pages

Brother FS100 User Manual - French - 104 pages

Brother FS100 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info