585610

Brother Fax-2800 Manual

116
Zoom out
Zoom in
Previous page
1/150
Next page
13 - 8
TROUBLESHOOTING AND ROUTINE MAINTENANCE
DIFFICULTY SUGGESTIONS
Phone Line or Connections
Dialing does not work. Check for a dial tone. Change TONE/PULSE
setting (See
Setting Tone/Pulse Dialing Mode (For
Canada Only)
, page 4-7). Check all line cord
connections, and make sure the curled handset cord
is not in the EXT jack. Check power cord
connection. Send a manual fax by pressing
Hook—OR—by lifting the handset, and dialing
the number. Wait to hear the fax receiving tones
before pressing Fax Start.
The FAX/MFC does not
answer when called.
Make sure the FAX/MFC is in the correct receiving
mode for your setup (either FAX, FAX/TEL or
TAD). Check for dial tone. If possible, call your
FAX/MFC to hear it answer. If there is still no
answer, check the telephone line cord connection.
Connect a standard telephone handset to the FAX/
MFC telephone jack. If there is no ringing when
you call your FAX/MFC, call your Telephone
Company to check the line.
There is no dial tone on
the handset.
Press Hook—OR—Lift the handset. If you hear
no dial tone, check telephone line cord connections
at the FAX/MFC and wall jack. Check that the
handset curled cord is connected to the FAX/
MFC’s handset jack. Test the jack with another
single line telephone. If no dial tone on the wall
outlet, call your telephone company.
Sending Faxes
Transmitting quality is
poor.
Try changing your resolution to
FINE
or
SUPERFINE
(See
Fax Resolution
, page 6-5). Make
a copy to verify the FAX/MFC’s scanner operation.
Transmission
Verification Report
prints “Results:NG”.
There is probably temporary noise or static on the
phone line. Try sending the fax again. If the
problem continues, call the Telephone Company to
check your phone line.
The receiving party says
the picture is not clear.
Sometimes the resolution mode you chose when you
sent your fax was not appropriate. Send the fax again,
but try using the FINE or SUPERFINE mode. Also,
your FAX/MFC’s scanner may be dirty, so try
cleaning it. (See page 13-16)
The receiving party says
vertical streaks appear
on the faxes they
receive.
Your FAX/MFC’s scanner may be dirty or the
receiving party’s print head may be dirty. Clean your
scanner (see page 13-16), and then make a copy to
check if the problem was caused by your machine.
… 116 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Fax-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Fax-2800 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info