585610

Brother Fax-2800 Manual

59
Zoom out
Zoom in
Previous page
1/150
Next page
SETUP RECEIVE
5 - 3
Setting the F/T Ring Time (For FAX/TEL Mode Only)
If you set the receive mode to FAX/TEL, you’ll need to determine how long the
FAX/MFC will send you its special double-ring when you have a voice call.
This ringing happens after the initial ringing from the phone company. Only the
FAX/MFC rings, for 20, 30, 40 or 70 seconds; no other phones on the same line
ring the special double-ring. However, you can answer the call on any extension
phone (in a separate wall jack) on the same line as the FAX/MFC. (See
Operation from Extension Telephone, page 5-5.)
1
Press Menu/Set, 2, 1, 2.
2
Press to select how long the FAX/MFC will ring to alert you that you have
a voice call, and then press Menu/Set.
3
Press Stop/Exit.
Now, when a call comes in and the FAX/MFC is set to FAX/TEL mode, all
phones on this line will ring the number of times you selected in Ring Delay.
You can let the FAX/MFC answer and detect if it’s a fax or voice call. If it’s a
fax call, the FAX/MFC prints the fax. If it’s a voice call, the FAX/MFC signals
you with a double-ring for the length of time you selected in F/T Ring Time.
Easy Receive
When you use this feature, you don’t have to press Fax Start when you answer
a fax call and hear calling beeps. Just hold the handset and wait a few seconds.
When you see RECEIVING on the LCD or when you hear “chirps” through the
handset of an extension phone connected to another wall jack, just replace the
handset. Your FAX/MFC does the rest. Selecting ON allows the FAX/MFC to
receive fax calls automatically, even if you lift the handset of an extension or
external phone. Selecting SEMI lets the FAX/MFC receive the call only if
you’ve answered it at the FAX/MFC. Selecting OFF means you’ll have to
activate the FAX/MFC yourself, by pressing Fax Start or by pressing 5 1 if
you are not at your FAX/MFC.
(See
Operation from Extension Telephones, page 5-5 and For FAX/TEL Mode Only,
page 5-5.)
If you’ve set the feature to
ON
, but your FAX/MFC doesn’t automatically
connect a fax call when you lift an external or extension phone handset, press the
Fax Receive code
5
1
. At the FAX/MFC, lift the handset and then press
Fax Start
.
Even if the caller hangs up during the double-ringing, the FAX/MFC continues
for the set time.
2.F/T RING TIME
RING TIME:20 SEC
or
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Fax-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Fax-2800 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info