41475
92
Zoom out
Zoom in
Previous page
1/127
Next page
82
Transferring your faxes or
Fax Journal report B
If the LCD shows:
Change Unable XX
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
Tel Disabled XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine on page 83.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 83.)
Note
If there is an error message on the machine's
LCD, after the faxes have been transferred,
disconnect the machine from the power source
for several minutes, and then reconnect it.
No Response/Busy
The number you dialed does not
answer or is busy.
Verify the number and try again.
Not Registered
You tried to access a One-Touch or
Speed Dial number that is not
programmed.
Set up the One-Touch or Speed Dial number.
(See Storing Speed-Dial numbers on page 45.)
Out of Memory The machine's memory is full. Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try
again.
Clear the data in the memory. To gain extra
memory, you can turn off Fax Storage.
(See Turning off Remote Fax
Options on page 52.)
Print the faxes that are in the memory. (See
Printing a fax from the memory on page 33.)
Paper Jam Paper is jammed in the machine. Open the Upper and Lower Jam Clear Covers
(at back of machine) and remove the jammed
paper. (See Printer jam or paper
jam on page 84.)
Print Unable XX
Scan Unable XX
Tel Disabled XX
(FAX-1560 only)
The machine has a mechanical
problem.
—OR
A foreign objects such as a clip or
ripped paper is in the machine.
Open the Upper Jam Clear Cover and remove
any foreign objects inside the machine.
(FAX-1355 and FAX-1360) If the error message
continues, see Transferring your faxes or Fax
Journal report on page 82 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
(FAX-1460 and FAX-1560) Disconnect the
machine from the power for several minutes,
then reconnect it. (The machine can be turned
off for up to 24 hours without losing faxes stored
in the memory.)
Wrong Paper Size
Paper is not the correct size. Load the correct size of paper (Letter, Legal or
A4), and then press Start.
Error Message Cause Action
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FAX-1560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FAX-1560 in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FAX-1560

Brother FAX-1560 User Manual - German - 135 pages

Brother FAX-1560 User Manual - Dutch - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info