579563
78
Zoom out
Zoom in
Previous page
1/92
Next page
Troubleshooting
70
My scanner is
connected but it will
not feed my document
or do anything else.
Your document is not set correctly. Insert your document until you feel the top edge of
the document touch the inside of your scanner.
Your document is too thin or too thick. Check that your document is acceptable (see
Document Specifications on page 12).
If your document is not the problem:
1. Confirm that the Micro USB Cable connecting
your scanner to your computer is properly
connected.
2. Reinstall the scanner driver from the DVD-ROM.
The scanner’s top cover is open. Close the top cover and start scanning again.
The scanner is turned off because the
auto power off function is active.
Press the Power button to turn on the scanner.
You are operating the settings menu.
(SD mode only)
Get out of the settings menu to put the scanner into
standby mode.
No SD card is inserted in the scanner’s
SD card slot. (SD mode only)
Insert an SD card into the scanner’s SD card slot.
The document is
jammed.
Causes may vary. Open the scanner’s top cover and gently pull out
the document. Make sure that no piece of paper
remains in the scanner.
Your document is not acceptable for the
machine (for example, if the paper is
too long).
Make sure your document is acceptable for the
machine (see Document Specifications on
page 12).
Use the supplied Carrier Sheet (see Loading the
Carrier Sheet on page 16).
My scanner gets
warm.
It is normal for your scanner to emit a
small amount of heat after prolonged
use.
If there is a strange smell coming from the scanner
or the scanner feels a little bit hot to the touch,
immediately remove the Micro USB Cable from
your scanner and computer.
The scan quality is
poor.
Paper dust has accumulated inside
your scanner.
Clean your scanner (see Scanner Maintenance on
page 65).
Calibration needs to be performed. Perform the calibration.
To perform the calibration using the control
panel, see Calibration using the control panel on
page 59.
For Windows
®
: to perform the calibration using
software, see Calibration using software (for
Windows
®
) on page 60.
For Macintosh: to perform the calibration using
software, see Calibration using software (for
Macintosh) on page 63.
The scanner resolution is too low. Increase the scanner resolution.
For Windows
®
: see Image settings on page 28.
For Macintosh: see Image settings on page 36.
Difficulty Cause Suggestions
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DS-820W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DS-820W in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DS-820W

Brother DS-820W User Manual - German - 98 pages

Brother DS-820W Installation Guide - Dutch - 6 pages

Brother DS-820W User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info