19830
129
Zoom out
Zoom in
Previous page
1/147
Next page
TROUBLESHOOTING AND ROUTINE MAINTENANCE
14 - 20
Follow these steps to replace the drum unit:
1
Open the front cover.
2
Remove the old drum unit. Place the drum
unit on a drop cloth or disposable paper to
avoid scattering toner.
3
Hold down the lock lever on the right and
pull the toner cartridge out of the drum unit
assembly. (See Replacing the Toner
Cartridge, page 14-16.)
4
Wait to unpack the new drum unit until immediately before installing it. Place the
old drum unit into the aluminium bag and discard it according to local regulations.
5
Reinstall the toner cartridge into the new drum unit. (See Replacing the Toner
Cartridge, page 14-16.)
6
Reinstall the new drum unit, keeping the front cover open.
7
Press Clear Settings.
8
Press 1 and when the LCD shows
ACCEPTED, and close the front cover.
Caution
If toner scatters and your hands or clothes get dirty, immediately wipe it off or
wash it with cold water.
Discard the used drum unit according to local regulations. If you are not sure of
them, call your local Sanitation Department. Be sure to seal the drum unit
tightly so toner powder does not spill out of the unit. When discarding used
drum units, keep them separate from domestic garbage.
Lock
Lever
REPLACE DRUM?
1.YES 2.NO
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP1400 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info