Manual Brother DCP-L8400CDN (page 38 of 77) (English)

585305

Zoom out

Zoom in

1/77

Chapter 4

Remote retrieval 4

You can call your machine from any touch-

tone phone or fax machine and then use the

remote access code and remote commands

to retrieve fax messages.

Setting a Remote Access

Code 4

The Remote Access Code lets you access

the remote retrieval features when you are

away from your machine. Before you can use

the remote access and retrieval features, you

must set up your own code. The factory

default code is the inactive code (– – –l).

a Press .

b Press All Settings.

c Swipe up or down, or press a or b to

display Fax.

d Press Fax.

e Swipe up or down, or press a or b to

display Remote Access.

f Press Remote Access.

g Enter a three-digit code using the

numbers 0 to 9, * or # using the

Touchscreen's keyboard.

Press OK.

NOTE

DO NOT use the same code used for your

Remote Activation code (l51) or Remote

Deactivation code (#51) (see Basic User's

Guide).

h Press .

NOTE

You can change your code at any time. To

make your code inactive, press and hold

at step g to restore the default setting

–––l, and then press OK.

Using your Remote Access

Code 4

a Dial your fax number from a telephone

or another fax machine using touch tone

dialling.

b When your machine answers,

immediately enter your Remote Access

Code .

c The machine signals if it has received

messages:

 1 long beep -- Fax messages

 No beeps -- No messages

d When the machine gives two short

beeps, enter a command (see Remote

fax commands on page 33). The

machine will hang up if you wait longer

than 30 seconds to enter a command.

The machine will beep three times if you

enter an invalid command.

e Press 9 0 to reset the machine when you

are finished.

f Hang up.

NOTE

• If your machine is set to Manual mode

and you want to use the remote retrieval

features, wait for about 100 seconds after

it starts ringing, and then enter the remote

access code within 30 seconds.

• This setting may not be available in some

countries or supported by your local

telephone company.

Firmware update on printer DCP-L8400-CDN failed. Printer hangs with a white screen. Power off doesn't work.
How to recover? Submitted on 3-8-2020 at 10:30
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-L8400CDN in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-L8400CDN

Brother DCP-L8400CDN Installation Guide - English - 2 pages

Brother DCP-L8400CDN User Manual - English - 203 pages

Brother DCP-L8400CDN User Manual - German - 77 pages

Brother DCP-L8400CDN Installation Guide - German - 2 pages

Brother DCP-L8400CDN User Manual - German - 214 pages

Brother DCP-L8400CDN User Manual - Dutch - 77 pages

Brother DCP-L8400CDN Installation Guide - Dutch - 2 pages

Brother DCP-L8400CDN User Manual - Dutch - 204 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother DCP-L8400CDN Manual

Product: