522427
19
Zoom out
Zoom in
Previous page
1/30
Next page
19
For Wireless Network Users
Wireless Network
12
Manual configuration
from the control panel
(Windows
®
and
Macintosh)
a On your machine, press Menu.
Press a or b to choose 3.Network and press
OK.
Press a or b to choose 2.Setup Wizard and
press OK.
When WLAN Enable? is displayed, press a to
accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
b The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press a or b to
choose the SSID you wrote down in step 11-b
on page 15, then press OK.
If the wireless access point/router of the
selected SSID supports WPS and the machine
asks to use WPS, press a (Next) and go to c.
If the machine asks you to enter a Network
Key, go to d.
Otherwise, go to e.
c Press a (Yes) to connect your machine using
WPS. (If you choose b (No) to continue manual
setting, go to d to enter a Network Key.)
When the LCD shows Press WPS on rtr,
press the WPS button on your wireless access
point/router, and then press a (Next) and
a (Yes) to proceed.
Go to e.
d Enter the Network Key you wrote down in
step 11-b on page 15 using the a, b keys to
choose each letter or number.
Use Enlarge/Reduce key or Number of
Copies key to move the cursor left or right.
For example, to enter the letter a, press the a
key once. To enter the number 3, hold down
the a key until it appears.
The letters appear in this order: lower case,
upper case, numbers and then special letters.
(For more information, see Entering Text for
Wireless Settings on page 29.)
Press OK when you have entered all the
characters, then press a (Yes) to apply your
settings.
e Your machine will now try to connect to your
wireless network. It may take a few minutes.
f A connection result message appears for
60 seconds on the LCD and a wireless LAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 21.
Wireless setup is now complete.
To install MFL-Pro Suite, continue to
step 13.
For Windows
®
Users:
Now go to
Page 23
For Macintosh Users:
Now go to
Page 26
Note
If a list of SSIDs is not displayed, make sure
your access point is on. Move your machine
closer to the access point and try starting
from a again.
If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For details, see the Network User’s
Guide.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-J140W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-J140W in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-J140W

Brother DCP-J140W User Manual - English - 68 pages

Brother DCP-J140W Installation Guide - German - 32 pages

Brother DCP-J140W User Manual - German - 70 pages

Brother DCP-J140W User Manual - Dutch - 23 pages

Brother DCP-J140W Quick start guide - Dutch - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info