456115
73
Zoom out
Zoom in
Previous page
1/158
Next page
Troubleshooting and routine maintenance
65
C
Registration Registration failed. Press Mono Start/Colour Start and try it again.
Do one of the following:
Try manual Registration, Menu, 3, 7. (See
Manual Registration in the Software User’s
Guide on the CD-ROM.)
Put in a new belt unit. (See Replacing the
belt unit on page 108.)
Put in a new drum unit. (See Replacing the
drum unit on page 101.)
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 96.)
Turn off the machine’s power switch. Wait a
few seconds, then turn it on again.
If the problem continues, call your Brother
dealer.
Scan Unable XX The machine has a mechanical
problem.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try it again.
Toner Life End
Replace Black(K)
Toner Cartridge.
1
1
The toner
cartridge colour
which is used up is
shown in the
message.
The drum unit and toner
cartridges assembly is not
installed properly, or one or more
of the toner cartridges are used
up and printing is not possible.
Do one of the following:
Re-install the toner cartridges and drum unit
assembly.
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 96.)
If one of the colour toner cartridges is empty,
choose Mono in the printer driver to be able
to continue printing in monochrome.
Toner Low
Prepare New Black(K)
Toner Cartridge.
1
1
The toner
cartridge colour
which is near the
end of life is
shown in the
message.
If the LCD shows Toner Low,
you can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life and the toner will soon run
out.
Order a new toner cartridge now for the toner
cartridge colour that is low.
Waste Toner Full
It is time to replace the waste
toner box.
Replace the waste toner box. (See Replacing
the waste toner box on page 113.)
Waste Toner Soon
The waste toner box is almost full. Be ready to replace the waste toner box. (See
Replacing the waste toner box on page 113.)
Wrong Paper Size
The paper in the tray is not the
correct size or the tray is empty.
Load the correct size of paper in the tray.
Error Message Cause Action
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-9042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-9042 in the language / languages: English as an attachment in your email.

The manual is 18,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-9042

Brother DCP-9042 Installation Guide - English - 34 pages

Brother DCP-9042 User Manual - German - 165 pages

Brother DCP-9042 Installation Guide - German - 34 pages

Brother DCP-9042 Installation Guide - Dutch - 36 pages

Brother DCP-9042 User Manual - Dutch - 159 pages

Brother DCP-9042 User Manual - French - 157 pages

Brother DCP-9042 Installation Guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info