456115
70
Zoom out
Zoom in
Previous page
1/158
Next page
62
Error and maintenance messages C
As with any sophisticated office product, error and maintenance messages may be displayed. The
most common error and maintenance messages are shown below.
Error Message Cause Action
Calibrate Calibration failed. Press Mono Start/Colour Start and try it again.
Do one of the following:
Turn off the machine’s power switch. Wait a
few seconds, then turn it on again.
Put in a new drum unit. (See Replacing the
drum unit on page 102.)
Put in a new belt unit. (See Replacing the
belt unit on page 108.)
Put in a new waste toner box. (See Replacing
the waste toner box on page 113.)
If the problem continues, call your Brother
dealer.
Cartridge Error
Put the Black (K)
Toner Cartridge
back in.
1
1
The toner cartridge
colour with the
problem is shown
in the message.
The toner cartridge is not installed
properly.
Pull out the drum unit, take out the toner
cartridge that is indicated on the LCD, and put it
back into the drum unit again.
Change Belt Unit
It is time to replace the belt unit. Replace the belt unit. (See Replacing the belt
unit on page 108.)
Change PF Kit
MP
It is time to replace the paper
feeding kit for the MP tray.
Call your Brother dealer to purchase a new
PF Kit MP.
Change PF Kit 1
It is time to replace the paper
feeding kit for Tray 1.
Call your Brother dealer to purchase a new
PF Kit 1.
Cooling Down
Wait for a while
The temperature of the drum unit
or toner cartridge is too hot. The
machine will pause its current
print job and go into cooling down
mode. During the cooling down
mode, you will hear the cooling
fan running while the LCD shows
Cooling Down, and
Wait for a while.
Make sure that you can hear the fan in the
machine spinning and that the exhaust outlet
isn't blocked.
If the fan is spinning, remove any obstacles that
surround the exhaust outlet, and then leave the
machine turned on but do not use it for several
minutes.
If the fan is not spinning follow the suggestions
below.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-9042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-9042 in the language / languages: English as an attachment in your email.

The manual is 18,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-9042

Brother DCP-9042 Installation Guide - English - 34 pages

Brother DCP-9042 User Manual - German - 165 pages

Brother DCP-9042 Installation Guide - German - 34 pages

Brother DCP-9042 Installation Guide - Dutch - 36 pages

Brother DCP-9042 User Manual - Dutch - 159 pages

Brother DCP-9042 User Manual - French - 157 pages

Brother DCP-9042 Installation Guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info