456112
64
Zoom out
Zoom in
Previous page
1/136
Next page
56
Cooling Down
Wait for a while
The temperature of the drum unit
or toner cartridge is too hot. The
machine will pause its current
print job and go into cooling down
mode. During the cooling down
mode, you will hear the cooling
fan running while the LCD shows
Cooling Down, and
Wait for a while.
Make sure that you can hear the fan in the
machine spinning and that the exhaust outlet
is not blocked by something.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use
it for several minutes.
If the fan is not spinning, disconnect the
machine from the power for several minutes,
then reconnect it.
Cover is Open The ADF cover is not closed
completely.
Close the ADF cover of the machine, then
press Stop/Exit.
The top cover is not closed
completely.
Close the top cover of the machine.
Cover is Open The fuser cover is not closed
completely or paper was jammed
in the back of the machine when
you turned on the power.
Close the fuser cover of the machine.
Make sure paper is not jammed inside
the back of the machine, and then close
the fuser cover and press Mono Start or
Colour Start.
DIMM Error The DIMM is not installed
correctly. Or the DIMM is broken.
Turn off the machine. Re-install the DIMM
correctly. Wait a few seconds, and then turn
it on again. If this error message appears
again, replace the DIMM with a new one.
(See Installing extra memory on page 41.)
Document Jam The document was not inserted
or fed correctly, or the document
scanned from the ADF was too
long.
See Document jams on page 60 or Using the
automatic document feeder (ADF)
on page 21.
Drum Error The corona wire on the drum unit
needs to be cleaned.
Clean the corona wire on the drum unit. (See
Cleaning the corona wires on page 69.)
It is time to replace the drum
units.
Replace the drum unit with a new one for the
colour that is indicated on the LCD. (See
Replacing the drum units on page 86.)
Drum End Soon(X)
1
The drum unit for the colour
indicated on the LCD is near the
end of its life.
Buy new drum unit for the colour indicated on
the LCD before you get a
Replace Drum(X)
1
message.
Drums End Soon The drum units are near the end
of their life.
Buy new drum units before you get a
Replace Drums message.
Fuser Error The temperature of fuser unit
does not rise at a specified
temperature within specified time.
Turn the power switch off, wait a few
seconds, and then turn it on again. Leave the
machine for 15 minutes with the power on.
The fuser unit is too hot.
Error Message Cause Action
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-9010CN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-9010CN in the language / languages: English as an attachment in your email.

The manual is 13,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-9010CN

Brother DCP-9010CN Installation Guide - English - 31 pages

Brother DCP-9010CN Installation Guide - German - 31 pages

Brother DCP-9010CN User Manual - German - 140 pages

Brother DCP-9010CN Installation Guide - Dutch - 221 pages

Brother DCP-9010CN User Manual - Dutch - 138 pages

Brother DCP-9010CN Installation Guide - French - 31 pages

Brother DCP-9010CN User Manual - French - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info