585297
63
Zoom out
Zoom in
Previous page
1/122
Next page
Troubleshooting
55
B
Duplex Disabled The duplex tray is removed or is
not correctly installed.
Carefully put the duplex tray into the
machine until it clicks into place.
The back of the machine is not
closed completely.
Close the back cover of the machine.
EL Error The machine has a mechanical
problem.
Open the front cover and close it again.
Fuser Error The temperature of the fuser unit
does not rise to a specified
temperature within the specified
time.
Turn the power switch off, wait a few
seconds, and then turn it on again. Leave
the machine for 15 minutes with the power
turned on.
The fuser unit is too hot.
Init Unable XX The machine has a mechanical
problem.
Disconnect the machine from the power
for several minutes and then reconnect
it.
If the problem continues, call your
Brother dealer.
Jam Duplex The paper is jammed in the
duplex tray at the back of the
machine.
(See Paper is jammed in the Duplex Tray
on page 66.)
Jam Inside The paper is jammed inside the
machine.
(See Paper is jammed inside the machine
on page 62.)
Jam Rear The paper is jammed in the back
of the machine.
(See Paper is jammed at the back of the
machine on page 60.)
Jam Tray The paper is jammed in the paper
tray of the machine.
(See Paper is jammed in the standard paper
tray on page 59.)
No Paper The machine is out of paper or
paper is not correctly loaded in
the paper tray.
Do one of the following:
Refill the paper in the paper tray and
press Start.
Remove the paper and load it again.
Then press Start.
If the problem is not resolved, the paper
pick-up roller may need to be cleaned.
Clean the paper pick-up roller. (See
Cleaning the paper pick-up rollers
on page 52.)
Manual Feed Manual feed was selected as the
paper source when there was no
paper in the manual feed slot.
Place a sheet of paper in the manual feed
slot. (See Loading paper in the manual feed
slot on page 11.)
No Toner The toner cartridge is not installed
correctly.
Pull out the drum unit. Take out the toner
cartridge and then put it back into the drum
unit.
Error Message Cause Action
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-7055W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-7055W in the language / languages: English as an attachment in your email.

The manual is 9,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-7055W

Brother DCP-7055W User Manual - English - 24 pages

Brother DCP-7055W Installation Guide - English - 35 pages

Brother DCP-7055W User Manual - German - 25 pages

Brother DCP-7055W Installation Guide - German - 36 pages

Brother DCP-7055W User Manual - German - 126 pages

Brother DCP-7055W User Manual - Dutch - 23 pages

Brother DCP-7055W Installation Guide - Dutch - 35 pages

Brother DCP-7055W User Manual - Dutch - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info