451175
24
Zoom out
Zoom in
Previous page
1/35
Next page
Installing the Driver & Software
22
STEP 2
Macintosh
®
Macintosh
®
USB
3
For USB Interface Users
(For Mac OS
®
X 10.2.4 or greater)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 11.
Note
•For Mac OS
®
X 10.2.0 to 10.2.3 users, upgrade to
Mac OS
®
X 10.2.4 or greater. (For the latest
information for Mac OS
®
X, visit
http://solutions.brother.com
)
Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1 Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2 Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine as shown
below.
3 Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your Macintosh
®
.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your Macintosh
®
.
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
4 Lift the scanner cover to release the lock .
Gently push the scanner cover support
down and close the scanner cover .
Note
Make sure that the machine is turned on by
connecting the power cord.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-350C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-350C in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-350C

Brother DCP-350C User Manual - English - 118 pages

Brother DCP-350C Installation Guide - German - 35 pages

Brother DCP-350C User Manual - German - 123 pages

Brother DCP-350C Installation Guide - Dutch - 35 pages

Brother DCP-350C User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info