120853
21
Zoom out
Zoom in
Previous page
1/43
Next page
Installing the Driver & Software
19
Windows
®
Wireless
Network
Windows
®
2 Turn on the machine by plugging in the power
cord.
Improper Setup
If you have previously configured the wireless
settings of the machine you must reset the
network (LAN) settings before you can
configure the wireless settings again.
Press Menu.
Press a or b for 3.LAN and press Set.
Press a or b for 0.Factory Reset and press
Set.
Press a for Reset.
If the machine asks you Reboot OK?, press a
for Yes. The machine will restart automatically.
3 On your machine, press Menu, then use the a,
b and Set keys to choose 3, 6, then WLAN,
then a Yes to reboot the machine. The wired
network interface will become inactive with this
setting.
It will take about a minute for the LAN menu on
the LCD to become available again.
A four level indicator on the right of your
machine’s LCD shows the wireless signal
strength.
4 When the LAN menu becomes available, press
Menu, then use the a, b and Set keys to
choose 3, 3, 1. This will start the wireless setup
wizard.
5 The machine will search for your network and
display a list of available SSIDs. You should
see the SSID you wrote down earlier. If the
machine finds more than one network use the
a or b keys to choose your network, then
press Set.
6 Use the a, b and Set keys to choose one of
the options below: If your network is configured
for Authentication and Encryption you must
match the settings used for your network.
No Authentication or Encryption: Choose
Open system, press Set then choose None
for Encryption Type and press Set. Then
press a Yes to apply your settings. Go to step
9.
No Authentication with WEP Encryption:
Choose Open system, press Set then use the
a or b to choose WEP for the Encryption
Type and press Set. Go to step 7.
Authentication with WEP Encryption:
Choose Shared Key, press Set. Go to step 7.
Authentication with WPA-PSK (TKIP)
Encryption: Choose WPA-PSK, press Set. Go
to step 8.
7 Choose the appropriate key number and press
Set. Enter the WEP key you wrote down in step
1 using the a, b and Set keys to choose each
letter or number. You can use the
Enlarge/Reduce and Number of Copies keys
to move the cursor left and right. For example,
to enter the letter a, press the a key once. To
enter the number 3, hold down the a key until
it appears.
The letters appear in this order: lower case,
upper case, numbers and then special letters.
Press Set when you have entered all the
characters, then press a Yes to apply your
settings. Go to step 9.
Most access points and routers can store
more than one key, but they will only use
one at any time for authentication and
encryption.
8 Enter the WPA-PSK (TKIP) key WPA you wrote
down in step 1 using the a, b and Set keys to
choose each letter or number. You can use the
Enlarge/Reduce and Number of Copies keys
to move the cursor. For example, to enter the
letter a, press the a key once. To enter the
number 3, hold down the a key until it appears.
Press Set when you have entered all the
characters, then press a Yes to apply your
settings. Go to step 9.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-340CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-340CW in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP-340CW

Brother DCP-340CW User Manual - English - 112 pages

Brother DCP-340CW Installation Guide - German - 44 pages

Brother DCP-340CW User Manual - German - 131 pages

Brother DCP-340CW Installation Guide - Dutch - 43 pages

Brother DCP-340CW User Manual - Dutch - 117 pages

Brother DCP-340CW Installation Guide - French - 43 pages

Brother DCP-340CW User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info