583919
55
Zoom out
Zoom in
Previous page
1/96
Next page
Telephone and external devices (MFC-1810, MFC-1811, MFC-1814 and MFC-1815)
47
8
Connections 8
The external TAD must be connected as
shown in the illustration below.
1TAD
2 Protective Cap
Before you connect an external TAD
(telephone answering device), remove the
protective cap (2) from the EXT. jack on the
machine.
aSet your external TAD to one or two
rings. (The machine’s Ring Delay
setting does not apply.)
bRecord the outgoing message on your
external TAD.
cSet the TAD to answer calls.
dSet the Receive Mode on your machine
to External TAD. (See Receive
modes on page 37.)
Recording an outgoing
message (OGM) 8
aRecord 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
bLimit your speaking to 20 seconds.
For example: “After the beep, leave a
message.”
Multi-line connections
(PABX) 8
Most offices use a central telephone system.
Brother recommends that all our Fax/MFC
machines are connected to a discreet
(dedicated) line. Although a particular Private
Automatic Branch Exchange (PABX) may
appear to work with a particular model of fax
machine, we cannot guarantee that the unit
will operate correctly.
While it is often relatively simple to connect a
fax machine to a PABX, we suggest that you
contact the company that installed your
telephone system and ask them to connect
the fax machine for you.
Brother does not recommend the use of a
PABX line. PABX limitations in general can
cause some functions of the fax machine not
to work correctly.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP-1511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP-1511 in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info