718892
12
Zoom out
Zoom in
Previous page
1/68
Next page
10
Stitch length
The normal stitch length setting is 3 mm. To
change the stitch length, turn the stitch length
adjustment dial on the right side of the machine.
<A>
a
b
1
Shorten the stitch length to a minimum of 2 mm (5/64 inch).
2
Lengthen the stitch to a maximum of 4 mm (5/32 inch).
<A> Selection mark
Differential feed
There are two sets of feed dogs under the presser
foot to move the fabric through the machine. The
differential feed controls the movement of both the
front and the rear feed dogs. When set at 1, the
feed dogs are moving at the same speed (ratio of 1).
When the differential feed ratio is set at less than
1, the front feed dogs move less than the rear
feed dogs, stretching the fabric as it is sewn. This
is effective on lightweight fabric that may pucker.
When the differential feed ratio is set at greater
than 1, the front feed dogs move more than the
rear feed dogs, gathering the fabric as it is sewn.
This function assists in removing rippling when
sewing stretch fabrics.
Differential feed adjustment
Feed ratio Main feed
(rear)
Differential
feed (front)
Effect Application
Less than
1.0
Material is
pulled tight.
Prevents thin
materials
from
puckering
1.0
Without
differential
feed.
Normal
sewing
Greater
than 1.0
Material is
gathered
or pushed
together.
Prevents
stretch
materials
from
stretching or
puckering
The normal setting is 1.0 on the differential feed
adjustment dial.
To adjust the differential feed, turn the dial on the
lower-right side of the machine.
<A>
a
b
1
Less than 1.0
2
Greater than 1.0
<A> Selection mark
An example
When stretch material is sewn without using the
differential feed, the fabric will be wavy.
To get a smooth finish, adjust the feed ratio from 1.0
toward 2.0.
(The feed ratio required depends on the elasticity
of the material.)
The more elastic the material, the further toward
2.0 the differential feed ratio should be set. Test
sew with a scrap of the fabric to find the correct
adjustment.
CAUTION
When sewing thick non-stretchable material such
as denim, do not use the differential feed as it may
damage the fabric.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CV-3550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CV-3550 in the language / languages: English, Spanish as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CV-3550

Brother CV-3550 User Manual - German - 68 pages

Brother CV-3550 User Manual - Dutch, French - 68 pages

Brother CV-3550 User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info