718826
36
Zoom out
Zoom in
Previous page
1/60
Next page
34
UTILITY STITCHES
j
Pull the upper thread at the end of the stitching
to the wrong side of the fabric, and then tie it
with the bobbin thread.
Use scissors to cut the upper thread and the
bobbin thread at the beginning of the stitching.
k
When you are finished attaching the button,
slide the feed dog position lever to to raise
the feed dogs.
You can use the zipper foot to sew different types of
zippers, and can easily position it to the right or left
side of the needle.
When sewing the right side of the zipper, attach the
shank to the left pin of the zipper foot. When sewing
the left side of the zipper, attach the shank to the right
pin of the zipper foot.
a
Select stitch .
b
Lower the presser foot lever and fix either the
left or right pin of the zipper foot onto the
shank.
c
Fold the edge of the material 2 cm (3/4 inch)
and place the zipper under the folded section.
Lower the needle into the notch located either
on the left or right side of the zipper foot.
d
Sew from the bottom of the zipper toward the
top on both sides. The needle should be
positioned on the zipper side of the foot for best
results.
e
To sew the opposite side of the zipper, release
the foot by pressing the button located at the
back of the presser foot, fit the zipper foot on
the other side of the zipper and continue sewing
using the other side notch.
ZIPPER INSERTION
Stitch Name
Pattern
Presser Foot
Pattern No.
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Straight
stitch
(center)
I 01010101
1
2
3
a Zipper foot
b Right pin for sewing
the left side of the
zipper
c Left pin for sewing the
right side of the zipper
CAUTION
Turn the handwheel by hand to make sure the
needle does not hit the presser foot before you
start sewing. If you choose a different stitch, the
needle will hit the presser foot and break the
needle. You may also be injured.
CAUTION
Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper, the
needle may break and you may be injured.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CS70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CS70 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CS70

Brother CS70 Quick start guide - English, German - 2 pages

Brother CS70 User Manual - German - 60 pages

Brother CS70 Quick start guide - Dutch - 2 pages

Brother CS70 User Manual - Dutch - 60 pages

Brother CS70 Quick start guide - French - 2 pages

Brother CS70 User Manual - French - 60 pages

Brother CS70 Quick start guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info