555762
36
Zoom out
Zoom in
Previous page
1/68
Next page
UTILITY STITCHES —————————————————————————————————————————————————
34
BLIND HEM STITCHING
You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing.
*Rfc.: Reinforcement
a
Fold the fabric along the desired edge of the
hem, and then baste it about 5 mm (3/16 inch)
from the edge of the fabric.
Fold back the fabric
along the basting, and then position the fabric
with the wrong side facing up.
b
Attach blind hem foot “R”.
c
Select a stitch.
d
Position the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
Check that the needle slightly catches the fold
of the hem.
If the needle catches too much of the hem fold
If the needle catches too much of the hem fold,
adjust the stitch width so that the needle slightly
catches the fold by pressing the “+” side of the
stitch width adjustment key.
If the needle does not catch the hem fold
If the needle does not catch the hem fold, adjust
the stitch width so that the needle slightly catches
the fold by pressing the “-” side of the stitch width
adjustment key.
For details on changing the stitch width,
refer to “Selecting stitching” (page 27).
e
Sew with the fold of the hem against the
presser foot guide.
f
Remove the basting stitching and turn the
fabric right side up.
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse/
Reinforcement
Stitching
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto Manual Auto Manual
Blind hem
stitch
R 09090909
Blind hem stitching on
medium weight fabrics
0
(0)
3 – –3
2.0
(1/16)
1.0–3.5
(1/16–1/8)
No No Rfc.
R 10101010
Blind hem stitching on
stretch fabrics
0
(0)
3 – –3
2.0
(1/16)
1.0–3.5
(1/16–1/8)
No No Rfc.
a Wrong side of fabric
b Basting
c Desired edge of hem
d 5 mm (3/16 inch)
a Needle
b Needle drop point
c Fold of hem
d Wrong side of fabric
e Guide
R
a Wrong side of fabric b Right side of fabric
a Wrong side of fabric b Right side of fabric
a Wrong side of fabric b Right side of fabric
*
*
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CS10 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CS10

Brother CS10 User Manual - German - 68 pages

Brother CS10 User Manual - Dutch - 68 pages

Brother CS10 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info