1863
136
Zoom out
Zoom in
Previous page
1/140
Next page
APPENDIX —————————————————————————————————————————————————————————
130
Error messages
If the start/stop button is pressed before the sewing machine is correctly set up or if an operation is performed
incorrectly, an error message appears in the LCD. Follow the instructions that appear.
If you press (OK key), (back key) or do the operation correctly while the error message is displayed,
the message disappears.
Error Message Probable Cause
The motor locked up because the thread is tangled.
The start/stop button, reverse/reinforcement stitch button
or thread cutter button was pressed while the presser
foot was raised.
The reverse/reinforcement stitch button, needle position
button or thread cutter button was pressed while the
bobbin winder shaft is moved to the right.
The start/stop button was pressed while the foot control-
ler was connected.
A stitch other than the buttonhole, bar tack or darning
stitch was selected and the start/stop button was pressed
while the buttonhole lever is lowered.
The buttonhole, bar tack or darning stitch was selected
and the start/stop button was pressed while the button-
hole lever is raised.
The start/stop button or reverse/reinforcement stitch but-
ton was pressed after a stitch has been deleted.
A pattern is being stored.
The bobbin winder is winding the bobbin.
More than 71 patterns are being combined.
The start/stop button was pressed without connecting the
foot controller while the setting for adjusting the stitch
width using the sewing speed controller is set to [ON].
The twin needle setting is selected while a pattern that
cannot be sewn with the twin needle is selected.
The first pattern was selected while two or more patterns
are combined.
The selected setting cannot be changed with the selected
pattern.
The start/stop button, reverse/reinforcement stitch button
or the thread cutter button was pressed while no thread
cassette was installed.
You tried to start sewing while the needle is lowered.
S3_brotherE.book Page 130 Wednesday, February 12, 2003 11:49 AM
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CS 8120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CS 8120 in the language / languages: English as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CS 8120

Brother CS 8120 User Manual - Dutch - 139 pages

Brother CS 8120 User Manual - French - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info