631153
42
Zoom out
Zoom in
Previous page
1/63
Next page
41
4
Securing the Stitching and Cutting the
Buttonhole
1
To secure the stitching, turn the material 90
degrees counterclockwise and sew Straight
Stitches to the end of the front bar tack of the
buttonhole.
2
Remove the material from the machine. We
recommend that you put pins across both
ends of the buttonhole as protection against
cutting the stitches.
3
Cut an opening in the middle of the
buttonhole with a seam ripper tool. Be careful
not to cut through any stitches.
Adjusting Buttonholes
If the stitching on the two sides of the buttonhole is
not the same, you can make the following
adjustments.
1
After sewing the left side of the buttonhole,
stitch the right side and observe the feeding.
1 Right row
2
If one side is too coarse or fine compared with
the other side, adjust the buttonhole fine
adjusting screw as shown below.
1 Buttonhole fine-adjusting screw
1 If the right side is too coarse, turn the
buttonhole fine adjusting screw with a large
screwdriver in the - direction.
2 If the right side is too fine, turn the
buttonhole fine adjusting screw with a large
screwdriver in the + direction.
This adjustment allows both sides of the
buttonhole to be the same.
When using the seam ripper to open the
buttonhole, do not put your hand or
finger in the path of the ripper. The
ripper may slip and injure you.
CAUTION
1
1
1 2
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Comfort 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Comfort 10 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Comfort 10

Brother Comfort 10 User Manual - German - 63 pages

Brother Comfort 10 User Manual - Dutch - 63 pages

Brother Comfort 10 User Manual - French - 63 pages

Brother Comfort 10 User Manual - Spanish - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info