Manual Brother CE 4000 (page 40 of 66) (English)

555761

Zoom out

Zoom in

1/66

Place a button between the presser foot and

the fabric.

• When attaching four-hole buttons, first sew

the two holes closest to you. Then, slide the

button so that the needle goes into the two

holes toward the rear of the sewing machine,

and then sew them in the same way.

Select a stitch . (With models not provided

with stitch , select stitch .)

Adjust the stitch width so that it is the same as

the distance between the holes in the button.

Set the stitch length to the shortest setting by

pressing the stitch length adjustment key.

Turn the handwheel toward you

(counterclockwise) to check that the needle

correctly goes into the two holes of the

button.

Adjust the stitch width to the distance between

the button holes.

Start sewing.

• After sewing for about 10 seconds at low

speed, press (reverse/reinforcement stitch

button) to sew reinforcement stitches.

Pull the upper thread at the end of the

stitching to the wrong side of the fabric, and

then tie it with the bobbin thread.

Use scissors to cut the upper thread and the

bobbin thread at the beginning of the stitching.

When you are finished attaching the button,

slide the feed dog position lever to (to

the left as seen from the front of the machine)

to raise the feed dogs.

● When sewing, be sure that the needle does

not touch the button, otherwise the needle

may bend or break.

CAUTION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother CE 4000 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother CE 4000 Manual

Product: