718772
147
Zoom out
Zoom in
Previous page
1/212
Next page
MAKING EMBROIDERY ADJUSTMENTS
145
Advanced Embroidery
5
Adjusting the Alternate Bobbin Case (with
No Color on the Screw)
When using the embroidery bobbin thread provided,
please be sure to choose the green marked bobbin case
when performing utility stitch sewing and embroidery
functions. When in the embroidery function mode, the
alternate bobbin case (with no color on the screw)
should be selected when substitute embroidery bobbin
threads (other than what is accompanied with your
machine) are being used. The alternate bobbin case
(with no color on the screw) can be easily adjusted
when bobbin tension changes are required to
accommodate different bobbin threads. Refer to
“Embroidering Attractive Finishes” on page 134.
To adjust the bobbin tension for embroidery function,
using the alternate bobbin case (with no color on the
screw), turn the slotted screw (-) with a (small)
screwdriver.
1 Do not turn a phillips screw (+).
2 Adjust with a screwdriver (small).
Correct Tension
Upper thread slightly appears on the wrong side of fabric.
Bobbin Thread Is Too Loose
Bobbin thread appears slightly on the right side of fabric.
If this occurs, turn the slotted screw (-) clockwise, being
careful not to over-tighten the screw, approximately 30-45
degrees to increase bobbin tension.
Bobbin Thread Is Too Tight
Upper thread on the right side of fabric seems to be lifting/
looping and bobbin thread is not seen on the wrong side
of fabric.
If this occurs, turn the slotted screw (-) counterclockwise,
being careful not to over-loosen the screw, approximately
30-45 degrees to decrease bobbin tension.
1 Right side
2 Wrong side
1 Right side
2 Wrong side
a
b
1 Right side
2 Wrong side
CAUTION
When adjusting the alternate bobbin case, be
sure to remove the bobbin from the alternate
bobbin case.
DO NOT adjust the position of the phillips (+)
screw on the alternate bobbin case as this may
result in damage to the bobbin case, rendering
it unusable.
If the slotted screw (-) is difficult to turn, do
not use force. Turning the screw too much or
providing force in either (rotational) direction
may cause damage to the bobbin case. Should
damage occur, the bobbin case may not
maintain proper tension.
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info