718772
69
Zoom out
Zoom in
Previous page
1/212
Next page
USEFUL FUNCTIONS
Sewing Basics
67
2
Automatic Fabric Sensor System (Automatic
Presser Foot Pressure)
The thickness of the fabric is automatically detected
and the presser foot pressure is automatically adjusted
with an internal sensor while sewing, to insure that your
fabric is fed smoothly. The fabric sensor system works
continuously while sewing. This function is useful for
sewing heavyweight fabrics (page 69), or quilting
(page 78).
Press , and then set [Automatic Fabric Sensor
System] to [ON]. (page 27)
Needle Position - Stitch Placement
When the [Needle Position - Stitch Placement] is set to
[ON], the needle will stop immediately before entering
the fabric so the needle drop point at the beginning of
stitching can be checked. Each press of (Needle
position button) changes the needle to the next
position. When the [Needle Position - Stitch Placement]
is [OFF], each press of (Needle position button)
simply raises and then lowers the needle.
Press , and then set [Needle Position - Stitch
Placement] to [ON] or [OFF]. (page 28)
[Needle Position - Stitch Placement] is [ON]
* When the needle is nearly lowered by pressing
(Needle position button), the feed dogs are lowered.
At this time, the fabric can be shifted to finely adjust
the needle drop point.
[Needle Position - Stitch Placement] is [OFF]
Using the Straight Stitch Needle Plate and
the Straight Stitch Foot
The straight stitch needle plate and the straight stitch
foot can only be used for straight stitches (middle
needle position stitches). Use the straight stitch needle
plate and the straight stitch foot when sewing thin
fabrics or when sewing small pieces which tend to sink
into the hole of the regular needle plate during sewing.
The straight stitch foot is perfect to reduce puckering on
lightweight fabrics. The small opening on the foot
provides support for the fabric as the needle travels
through the fabric.
a
Press (Needle position button) to raise the needle
and turn the main power to OFF.
b
Remove the needle and the presser foot holder
(page 48, page 50).
c
Remove the bobbin case and the needle plate.
(page 176, page 177.)
1 2.25 mm (1/8 inch)
2 4.25 mm (3/16 inch)
3 6.25 mm (1/4 inch)
4 8.5 mm (5/16 inch)
CAUTION
Always use the straight stitch foot in
combination with the straight stitch needle
plate.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info