718772
47
Zoom out
Zoom in
Previous page
1/212
Next page
UPPER THREADING
Getting Ready
45
1
Using the Twin Needle Mode
The twin needle can only be used for stitch patterns that
show after being selected. Before you select a stitch
pattern, make sure the stitch can be sewn in the twin
needle mode (refer to the “STITCH SETTING CHART”
on page 194).
a
Press to lock all keys and buttons and then
install the twin needle (“CHANGING THE NEEDLE” on
page 48).
b
Thread the machine for the first needle according to
the procedure for threading a single needle (“Upper
Threading” on page 42).
c
Pass the thread through the needle bar thread guides
on the needle bar, then thread the needle on the left
side manually.
1 Needle bar thread guide
d
Pull up the supplemental spool pin and set it in the up
position. Place the additional spool of thread on the
supplemental spool pin, so that the thread unwinds
from the front. Push the spool cap onto the spool pin as
far as possible to secure the thread spool.
1 Spool cap
2 Spool pin
3 Spool of thread
e
Hold the thread from the spool with both hands, and
place the thread in the thread guide.
* Do not place the thread in the pretension disks.
1 Thread guide
f
While holding the thread from the spool, pull the
thread through the lower notch in the thread guide
plate, then through the upper notch. Hold the end of
the thread with your left hand, and then guide the
thread through the groove, following the arrows in the
illustration.
g
Continue threading; however, do not pass the thread in
the needle bar thread guide “6” on the needle bar.
Thread the needle on the right side.
1 Needle bar thread guide
h
Press to unlock all keys and buttons.
i
Select a stitch pattern.
* Refer to “Basic Sewing” on page 56 for selecting a
stitch pattern.
* Refer to “STITCH SETTING CHART” on page 194
for the proper stitch to use with presser foot “J”.
CAUTION
Only use a genuine Brother twin needle.
When using the twin needle, it is
recommended to use presser foot “J”.
(Automatic threading button) cannot be used.
Manually thread the twin needle from front to back.
Using (Automatic threading button) may result
in damage to the machine.
a
a
b
c
a
a
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info