718772
29
Zoom out
Zoom in
Previous page
1/212
Next page
LCD SCREEN
Getting Ready
27
1
Using the Machine Settings Key
Press to change the default machine settings
(needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens,
press for “Sewing settings”, for “General
settings”, for “Embroidery settings” or for
“Wireless LAN settings”.
Sewing Settings
1 Select whether to use the sewing speed controller to
determine the zigzag width (page 79).
2 Make adjustments to character or decorative stitch
patterns (page 97).
3 Adjust the presser foot height. Select the height of the
presser foot when the presser foot is raised.
4 Adjust the presser foot pressure. The higher the number,
the greater the pressure will be. Set the pressure at [3]
for normal sewing.
5 Adjust the amount of fabric feeding of the dual feed foot
(page 53).
6 Select whether [1-01 Straight stitch (Left)] or [1-03
Straight stitch (Middle)] is the utility stitch that is
automatically selected when the machine is turned on.
7 Select whether utility stitches or quilting stitches
are displayed first on the stitch selection screen.
8 You can activate this setting after connecting the multi-
function foot controller (sold separately). (These settings
appear when the multi-function foot controller is
connected to the machine.)
9 Select the height of the presser foot when sewing is
stopped when the pivot setting is selected (page 65).
0 Select the height of the presser foot when the machine is
set to free motion sewing mode (page 80).
A When set to [ON], the thickness of the fabric is
automatically detected by an internal sensor while
sewing. (page 67)
B When set to [ON], reinforcement stitches are sewn at the
beginning and/or end of sewing for a reinforcement
stitch pattern, even when (Reverse stitch button) is
pressed (page 60).
C Adjust the guideline marker position and brightness
(page 65).
D Select whether to lower the presser foot automatically
before starting sewing. (page 61)
E Select whether to raise the presser foot automatically
when stopping sewing. (page 61)
F Select whether pressing (Thread cutter button)
automatically lowers the presser foot before cutting the
thread. The presser foot will be raised after the thread is
cut. (page 61)
G You can save the current settings screen image in a USB
media by pressing this button when the USB media is
inserted into the USB port. The files are saved in a folder
labeled [bPocket].
H Reset settings on this page to original default. Some
settings are not reset.
Memo
Press or to display a different settings
screen.
1
2
3
4
5
6
8
7
H
A
B
C
9
0
G
D
E
F
Controller Functions that can be specified
Main foot controller Start/Stop
Heel switch Select any of the following:
[Thread Cutting]
[Needle Position Up/Down]
[Single Stitch]
[Reverse Stitch] (Reinforcement
Stitch)
[Presser Foot Up/Down]
[No setting]
Side pedal
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info