631140
29
Zoom out
Zoom in
Previous page
1/52
Next page
27
2
STRAIGHT AND ZIGZAG STITCHING
Please Read Before Sewing
Straight Stitching
*Turn the stitch width dial to adjust the needle
position. Setting the dial to 5 selects the left
needle position; setting the dial to 0 selects the
right needle position.
Starting Sewing
1
Turn the pattern selection dial to choose the
stitch number you want. You also need to set
the pattern selection dial to the Straight Stitch
or Triple Stretch Stitch.
2
Raise the needle to its highest position and lift
the presser foot lever.
3
Pull the upper thread though the toes of the
presser foot.
4
Put the fabric under the presser foot and
position the needle 1 cm (3/8 inch) from the
edge of the fabric.
5
Lower the presser foot.
6
To back tack, push down the reverse sewing
lever as far as possible, and then press the foot
controller to start reverse sewing. Release the
foot controller to stop sewing.
7
Release the reverse sewing lever and start
sewing in the forward direction by pressing
the foot controller.
You can use reverse sewing for locking the
end of seams and to strengthen a stitch.
To avoid being injured, watch the needle carefully while you are using the machine. Keep
your hands away from moving parts.
Do not stretch or pull the fabric during sewing, otherwise the needle may be damaged and
you may be injured.
Do not use bent or broken needles, otherwise you may be injured.
Take care that the needle does not hit basting pins or other objects during sewing. The needle
may break and you may be injured.
Always use the correct presser foot. If you use the wrong presser foot, the needle may hit the
presser foot and bend or break and you may be injured.
When you turn the handwheel by hand, always turn it toward you (counterclockwise).
Turning it the other way may cause the thread to tangle and damage the needle or fabric, and
you may be injured.
CAUTION
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Straight Stitch
1-4
(1/64-3/16)
5-0*
(3/16-0)
Triple Stretch
Stitch
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
Make sure the needle does not hit a pin
or any other object during sewing. The
thread could tangle or the needle could
break, and you may be injured.
CAUTION
2
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BM-3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BM-3600 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother BM-3600

Brother BM-3600 User Manual - German - 51 pages

Brother BM-3600 User Manual - Dutch - 51 pages

Brother BM-3600 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info