631141
47
Zoom out
Zoom in
Previous page
1/52
Next page
45
6
5
Using a coin, remove the two screws.
Lift up the needle plate as shown in the
illustration, and then slide the needle plate to
the left to remove it.
1 Use a coin or screwdriver
6
Grasp the bobbin case, and then lift it out to
the left.
7
Use the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.
1 Cleaning brush
2 Race
Do not apply oil to the bobbin case.
8
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
1 Projection
2 Spring
9
Install the needle plate, sliding it to the right
to secure it, and then tighten the screws.
Make sure that the tab on the left side of the
needle plate is aligned with the notch in the
bobbin case.
1 Tab
2 Notch
3 Screws
0
Install the needle plate cover.
Insert the tabs on the needle plate cover into
the notches in the needle plate, and then slide
the cover back into position.
Never use a bobbin case that is
scratched; otherwise the upper thread
may become tangled, the needle may
break, or sewing performance may
suffer. For a new bobbin case (part code:
XC8993-021), contact your nearest
authorized service center.
Make sure that you fit the bobbin case
properly, otherwise the needle may
break.
3
CAUTION
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BM-2700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BM-2700 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother BM-2700

Brother BM-2700 User Manual - German - 51 pages

Brother BM-2700 User Manual - Dutch - 51 pages

Brother BM-2700 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info