644489

Brother BE-1204B-BC - PC control Manual

246
Zoom out
Zoom in
Previous page
1/262
Next page
11-6 BE-1204B-BC • BE-1206B-BC
Chapter 11 Error code list
Code Error Measures
E-D2 Power voltage upper limit error
E-D3 Power voltage lower limit error
(1) The voltage setting is improper. -> Set it again.
(2) Press the
or turn on the F/B switch on the head to
either side. If the same error occurs again, the power PCB
or the power supply is faulty.
E-D4 Thread trimming motor overcurrent
Turn OFF the power. The possible causes for this error are,
troubles of the thread trimming motor, troubles of the main PCB,
and troubles of the drive PCB.
E-D5 Needle bar case motor overcurrent
Turn OFF the power. The possible causes for this error are,
troubles of the needle bar case motor, troubles of the main
PCB, and troubles of the drive PCB.
E-D6 Jump motor overcurrent
Turn OFF the power. The possible causes for this error are
troubles of the jump motor and troubles of the head PCB.
E-D7
The temperature of the heat sink on the drive
PCB rose excessively
Turn OFF the power and check if the fan filter has any clogging.
E-D8 Temperature sensor abnormal
Turn OFF the power. The possible causes for this error are
troubles of the thermistor and troubles of the drive PCB.
E-E1 X-axis pulse motor overcurrent stop
E-E2 Y-axis pulse motor overcurrent stop
Turn OFF the power and ON once. If the same error occurs
again, the pulse motor or the drive PCB is faulty.
E-E3 Cooling fan motor stop A Press R.
Turn OFF the power and check the fan harness. Turn OFF the
power again. If the same error occurs again, the fan or the
power PCB is faultly.
E-E4 Lower shaft communication error
E-E5
Over-run error during interfacing to main PCB
CPU
E-E6
Framing error during interfacing to main PCB
CPU
E-E7
Parity error during interfacing to main PCB
CPU
E-E8
Receiving time up error during interfacing to
main PCB CPU
E-E9
Send/Receive inconsistent error during
interfacing to main PCB CPU
E-EA
ACK code receiving error during interfacing to
main PCB CPU
E-EB
Send/Receive ID code error during interfacing
to main PCB CPU
E-EC
Send data checksum error during interfacing to
main PCB CPU
E-ED
Data empty error during interfacing to main
PCB CPU
E-EE
Abnormal data received in the inner-machine
communication
E-EF Receiving error on interface
E-F1 Receive time up error
E-F2 Request-to-waiting time up error
E-F3 Request-to-receive time up error
E-F4 Receive command error
E-F5 NACK code receiving error
E-F6
Data requested for needle position can not be
returned.
E-F7 It is not receive command for the request one.
This is not usually displayed.
… 246 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BE-1204B-BC - PC control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BE-1204B-BC - PC control in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info