Manual Brother BE-1204B-BC - PC control (page 50 of 262) (English)

644489

Zoom out

Zoom in

1/262

2-22 BE-1204B-BC • BE-1204C-BC • BE-1206B-BC

Chapter 2 Preparation of Embroidery Machine

3-4 Attachment of Embroidery Hoop and Frame

! Tubular square hoop

BE-1204B,BE-1206B

1. Loosen the thumb bolt M6 [1] to draw it to the

center.

2. Align the positioning hole on the tubular

round arm frame [4] with the positioning pin

[3] (S58665) on the X-feed sash [5] (S58650),

and fit the tubular round arm fixing nut [2] on

the back side of the thumb bolt M6 [1] into the

hole on the X-feed sash.

3. While keeping the nut in the hole, slide the

thumb bolt M6 toward the edge and tighten it

firmly at the outermost point.

BE-1204C

The frame is fixed to the position of (1) for 360

pitch, so is to (2) for 400 pitch and to (3) for

500 pitch.

1. The tublar round arm frame R [4] is fixed with

the thumb bolt [5] to the connecting plate [6]

to align with each pitch. At the same time, put

the positioning pin [7] into a hole at the center

of the tublar round arm frame R [4].

2. Insert the grooves of the tublar round arm

frame L [8] and R [4] onto the thumb bolt M6

[10] on the X-feed sash [9] so as to align with

each pitch and fix them.

W1243Q

[1]

[4]

[2]

[5]

[2]

[3]

2843M

2844M

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother BE-1204B-BC - PC control in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother BE-1204B-BC - PC control Manual

Product: