494062
15
Zoom out
Zoom in
Previous page
1/43
Next page
General Information
4
1
Note
If you hear three short beeps, the cordless
handset did not register. Repeat steps b
and d.
If you want to install another cordless
handset, repeat steps a through d.
e Press Stop/Exit on the control panel of
the machine (base unit).
For Color LCD models (base unit)
1
a Press Menu/OK on the cordless
handset.
Note
If you see Enter Register HS Mode
on Base Unit on the LCD of the
cordless handset, go to step c.
b Press a or b to choose Register HS.
Press Menu/OK.
c Press Menu on the control panel of the
machine (base unit).
d Press a or b to choose
Initial Setup.
Press OK.
e Press a or b to choose
Register Handset.
Press OK.
f Press a or b to choose Register.
Press OK.
You will hear one long beep when the
cordless handset is registered correctly.
Note
If you hear three short beeps, the cordless
handset did not register. Repeat step b
and f.
If you want to install another cordless
handset, repeat steps a through f.
g Press Stop/Exit on the control panel of
the machine (base unit).
Deregistering cordless
handsets
If you want to register a handset that has
already been registered, with another
machine (base unit), you should deregister it
first, and then register it with the other
machine (base unit). (See Registering
additional cordless handsets on page 3.) If
you are using more than one cordless
handset, deregistration will remove all
handsets registered with the machine (base
unit).
Note
Do not operate any other cordless
handsets until deregistration of the
cordless handset you are removing has
completed.
For non-Color LCD models (base unit) 1
a Press Menu, 0, 6 on the control panel of
the machine (base unit).
b Press Erase.
Then, confirm the Delete by pressing 1.
c Press Stop/Exit.
For Color LCD models (base unit)
1
a Press Menu on the control panel of the
machine (base unit).
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose
Register Handset.
Press OK.
d Press a or b to choose Terminate.
Press OK.
Then, confirm the Delete by pressing 1.
e Press Stop/Exit.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BCL-D10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BCL-D10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info