631124
33
Zoom out
Zoom in
Previous page
1/48
Next page
32
3
4
Sew with the center of the presser foot
aligned along the center of the two pieces
of fabric.
5
After sewing is finished, remove the paper
and the basting stitches.
Overedge stitching
These stitches are used to join together seams and finish
them in one operation. Elastic Overlock Stitch: for
sewing stretch materials.
1
Put the fabric under the presser foot so
that the seamline (or arrowhead point) is
approximately 3 mm (1/8 inch) to the left
of the center of the presser foot.
This stitch works best with a seam allowance
of approximately 5 mm (3/16 inch) as this
allows the right (zigzag) side of the stitch to
overlock the cut edge of the fabric.
1 5 mm (3/16 inch)
2 3 mm (1/8 inch)
If the seam allowance is wider than the stitch
pattern, trim away any excess fabric after
stitching.
When sewing the Elastic Overlock Stitch,
position the fabric so that its edge is on the
left of the needle.
Stitch Name
Pattern Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
37 27
Elastic Shell
Tuck Stitch
F-3
(1/64-1/8)
3-5
(1/8-3/16)
Elastic Overlock
Stitch
Fixed
2.5 (3/32)
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
3-5
(1/8-3/16)
Comb Stitch
Fixed
2.5 (3/32)
3-5
(1/8-3/16)
12
22
17
23
18
25
20
2
1
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother AE2700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother AE2700 in the language / languages: English as an attachment in your email.

The manual is 18,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info