579538
128
Zoom out
Zoom in
Previous page
1/238
Next page
Scan from the Control Panel of the Machine
116
4
Configure the FTP Default Settings 4
You can set Passive Mode to Off or On depending on your FTP server and network firewall configuration.
By default this setting is On. You can also change the port number used to access the FTP server. The default
for this setting is port 21. In most cases these two settings can remain as the default (the example below uses
ADS-1600W).
1 (ADS-1600W only)
Choose FTP in Scan to FTP/Network from the Scan tab. Click Submit.
2 Choose the Profile you want to configure in Scan to FTP Profile (for ADS-1100W) or Scan to
FTP/Network Profile (for ADS-1600W) from the Scan tab.
3 Enter the name that you want to use for the profile of the FTP server. This name will be displayed in
Destination in Scan to Network Device from the Scan tab (ADS-1100W only) or on the LCD of the
machine (ADS-1600W only), and can be up to 15 characters.
4 The Host Address is the domain name of the FTP server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
5 Enter the Username that has been registered with the FTP server for the machine (up to 32 characters).
6 Enter the Password for access to the FTP server (up to 32 characters).
7 Enter the destination folder where your document will be stored on the FTP server (for example
brother\abc) (up to 60 characters).
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother ADS-1600W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother ADS-1600W in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother ADS-1600W

Brother ADS-1600W User Manual - German - 239 pages

Brother ADS-1600W User Manual - Dutch - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info