Manual Brother 1940CN (page 184 of 231) (English)

16447

184

Zoom out

Zoom in

1/231

APPENDIX A A - 12

When you are using a TAD, the LCD shows

Telephone

(MFC-3240C and MFC-3340CN only) or

Ext. Tel in Use

(FAX-1840C and FAX-1940CN only).

Connections

The external TAD must be plugged into the back of the machine, into

the jack labeled EXT. Your machine cannot work properly if you plug

the TAD into a wall jack (unless you are using Distinctive Ring).

Plug the telephone line cord from the telephone wall jack into the

back of the machine, in the jack labeled LINE.

Plug the telephone line cord from your external TAD into the

back of the machine, in the jack labeled EXT. (Make sure this

cord is connected to the TAD at the TAD’s telephone

line

jack,

and not its telephone jack.)

If You Do Not Subscribe to Distinctive Ring Service:

You must plug your TAD into the EXT. jack of your machine. If

your TAD is plugged into a wall jack, both your machine and the

TAD will try to control the phone line. (See illustration below.)

Unless you are using Distinctive Ring, do not connect a

TAD elsewhere on the same phone line.

TAD

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1940CN in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother 1940CN Manual

Product: