525939
12
Zoom out
Zoom in
Previous page
1/68
Next page
5
TABLE OF
CONTENTS
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Chapter
9
Chapter
10
Chapter
11
Chapter
12
Chapter
13
Chapter
14
Chapter
15
Chapter
16
Chapter
17
Chapter
18
Needle
This machine uses a standard home sewing ma-
chine needle.
The recommended needle is SCHMETZ 130/705H.
To remove the needle
(1)Turn the main power switch to the OFF position.
(2)Turn the hand wheel counter-clockwise by hand
until the needle is at its highest position.
(3)Loosen the needle set screw with hexagonal
wrench and remove the needle.
1 Back
2 Front
3 Flat side
4 Groove
To insert the needle
(1)Turn the main power switch to the OFF position.
(2)Turn the hand wheel until the needle bar is at its
highest position.
(3)Hold the needle with its flat side away from you
and insert it up as far as it will go.
(4)Tighten the needle set screw securely with the
hexagonal wrench.
5 Place the needle on its flat side and check
to see if the space is parallel.
6 Flat side
7 (needle-plate, glass, etc.)
Aguja
Está máquina funciona con una aguja normal para
máquinas domésticas. Así mismo, se recomienda el
uso de una aguja SCHMETZ 130/705H.
Para sacar la aguja
(1)Apague el interruptor principal (posición OFF).
(2)Gire la ruedecilla a mano, en contra de las mane-
cillas del reloj hasta que la aguja alcance la
posición más elevada.
(3)Afloje el tornillo de instalación de la aguja con la
llave hexagonal y saque la aguja.
1
Parte trasera
2
Parte delantera
3
Parte llana
4
Canal
Para introducir la aguja
(1)Apague el interruptor principal (póngalo en OFF).
(2)Gire la ruedecilla hasta que la barra de la aguja
alcance la posición más alta.
(3)Sujete la aguja con la parte curvada de cara a Vd.
e insértela hacia arriba hasta el tope.
(4)Vuelva a apretar firmemente el tornillo de instala-
ción de la aguja con la llave hexagonal.
5
Coloque la aguja en su parte llana y com-
pruebe que el espacio sea paralelo.
6
Parte llana
7
Placa de aguja (Vidrio, etc.)
1
2
3
4
6
7
5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother 1134DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1134DW in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info