39201
63
Zoom out
Zoom in
Previous page
1/68
Next page
56
TABLE OF
CONTENTS
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Chapter
9
Chapter
10
Chapter
11
Chapter
12
Chapter
13
Chapter
14
Chapter
15
Chapter
16
Chapter
17
Chapter
18
Cambio de las cuchillas
Cambio de la cuchilla superior
(1)Para quitar la cuchilla, afloje el tornillo de instala-
ción de la cuchilla superior y levante dicha cuchilla.
(2)Introduzca la nueva cuchilla en el soporte de la
cuchilla superior.
(3)Luego, gire la polea con la mano hasta que la
cuchilla quede en la posición baja. Averigue que
la cuchilla superior quede enfrente de la inferior y
ajuste el espacio entre ella y la extremidad de la
cuchilla inferior entre 0,5 y 1 mm.
(4)Vuelva a apretar la cuchilla.
1
Tornillo de instalación de la cuchilla superior
2
Placa de agujas
3
Cuchilla superior
4
Cuchilla inferior
Replacing the knives
Replacing the upper knife
(1)To remove the knife, loosen the upper knife set
screw and pull up the upper knife.
(2)Insert the new knife into the upper knife holder.
(3)Then turn the pulley by hand until the upper knife
is in the down position. Check that the upper knife
is in front of the lower one and adjust the clear-
ance between it and the edge of the lower knife to
between 0.5 mm and 1.0 mm.
(4)Retighten the upper knife securely.
1 Upper knife set screw
2 Needle plate
3 Upper knife
4 Lower knife
Cambio de la cuchilla inferior
(1)Para quitar la cuchilla, afloje el tornillo de instala-
ción de la cuchilla inferior y baje dicha cuchilla.
(2)Introduzca la nueva cuchilla en el soporte previs-
to.
(3)Coloque la cuchilla inferior para que su extremi-
dad quede muy cercana a la placa de agujas.
(4)Vuelva a apretar el tornillo de instalación de la
cuchilla inferior.
Cabe ajustar el alineamiento de las cuchillas
superior e inferior para que corten adecuada-
mente.
Replacing the lower knife
(1)Loosen the lower knife set screw and pull down
the lower knife.
(2)Insert the new knife into the lower knife holder.
(3)Position the lower knife so that its edge is flush
with the needle plate.
(4)Tighten the lower knife set screw.
It is important to adjust the alignment of the upper
and lower knives for sharp cutting.
4
3
1
2
1.2~1.7mm
0.5~1.0mm
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother 1034D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1034D in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother 1034D

Brother 1034D User Manual - German - 36 pages

Brother 1034D User Manual - Dutch, French - 68 pages

Brother 1034D User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info