39201

Brother 1034D Manual

59
Zoom out
Zoom in
Previous page
1/68
Next page
52
TABLE OF
CONTENTS
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Chapter
9
Chapter
10
Chapter
11
Chapter
12
Chapter
13
Chapter
14
Chapter
15
Chapter
16
Chapter
17
Chapter
18
Pin tuck stitching with
blind stitch presser foot
The Pin tuck stitch uses a rolled edge to add shape
and decoration to any sewing project. Fold the fabric
on a line where the pin tuck is to be located and guide
the fold through the serger. Contrasting thread in the
upper looper adds an accent to your project.
Use the blind stitch presser foot to make narrow
overlock stitches to produce seams in the form of
tucks at equal distances from each other.
For thin fabrics, it’s a good idea to choose a fine
thread which will run smoothly.
a Replace the presser foot with a blind stitch presser
foot (multi purpose presser foot). (Refer to page
47.)
b Set up the machine for narrow overlock stitching.
(Refer to pages 42–45.)
c Draw equally spaced lines on the fabric with a
fabric pencil as guides for pin tuck placement.
Fold the fabric along one of the lines and press in
place lightly with an iron.
d Turn the handwheel counterclockwise to set the
needle at its highest position.
e Lift the presser foot lever and insert the fabric with
the folded edge in such a way that the needle
pierces just the folded edge.
f Lower the presser foot lever, adjust the fabric
guide toward the folded edge.
g Align the blind stitch presser foot guide with the
line on the right side of the stitch finger.
By turning the screw forward (toward you) the
stitch guide will go to the right. By turning the
screw backward (away from you) the stitch guide
will go to the left.
h Align the fold with the guide and insert the fabric
up to the needle position.
i Guide the fold in the fabric to sew half way
between the needle and the upper knife.
j Continue sewing until all marked lines have been
sewn.
• Correct minor contractions by hand.
Costuras de pliegues pe-
queños con prensatelas
multipropósito
Las puntadas de pliegues pequeños usan un borde
enrollado para agregar cierta forma y decoración a
cualquier obra de costura. Doble el tejido en una
línea donde quiere situar los pliegues y guie el
doblado por la máquina. Un hilo de color que con-
traste en el áncora superior añade cierta nota a su
obra.
Utilice el prensatelas multipropósito para coser pun-
tadas overlock en flecha y producir costuras como
pliegues a igual distancia cada una de la otra.
Para tejidos finos, le sugerimos elegir un hilo fino que
corre fácilmente.
a
Cambie el prensatelas por un prensatelas para
puntadas invisibles (prensatelas multipropósito)
(véase página 47).
b
Ajuste la máquina en la puntada overlock estre-
cha (véase páginas 42-46).
c
Con un lápiz especial de costura, dibuje líneas en
el tejido a igual distancia las unas de las otras
para que sirvan de guías en la ubicación de los
pliegues. Doble el tejido a lo largo de una línea y
plánchelo un poco.
d
Gire la ruedecilla en el sentido contrario al de las
manecillas de un reloj y ponga la aguja en su
posición más alta.
e
Levante la palanca del prensatelas e inserte el
tejido con el borde doblado a la izquierda para
que la aguja pique justo en el borde doblado al
coser.
f
Baje la palanca del prensatelas y ajuste la guía de
tejido hacia el borde doblado.
g
Alinee la guía del prensatelas para puntadas
invisibles en la línea a la derecha de la uñeta de
puntadas.
Al girar el tornillo hacia delante (hacia usted), la
guía de tejido se desplazará hacia la derecha y al
girarlo hacia atrás (alejándose de usted), la guía
de tejido se desplazará a la izquierda.
h
Alinee el doblado con la guía e inserte el tejido
hasta la posición de la aguja.
i
Guie el doblado del tejido para coser a medio
camino entre la aguja y la cuchilla superior.
j
Siga cosiendo hasta que todas las líneas marca-
das hayan sido cosidas.
•
Corrija las arrugas menores con la mano.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother 1034D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1034D in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother 1034D

Brother 1034D User Manual - German - 36 pages

Brother 1034D User Manual - Dutch, French - 68 pages

Brother 1034D User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info