39201
27
Zoom out
Zoom in
Previous page
1/68
Next page
20
TABLE OF
CONTENTS
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Chapter
9
Chapter
10
Chapter
11
Chapter
12
Chapter
13
Chapter
14
Chapter
15
Chapter
16
Chapter
17
Chapter
18
5 Slide and hold the thread tension release
button to the right, then pass the thread
through the tension disc which is in the
channel next to the blue tension adjust-
ment dial. Release the button.
6 Guide the thread down the channel and
pass the thread through the threading
points next to the blue color marks follow-
ing the numerical order in the accompany-
ing illustration up to the lowerlooper thread-
ing lever.
NOTE:
If the lowerlooper thread breaks during sewing,
cut and remove thread from both of the needles.
Before re-threading the lowerlooper, make sure
that the lowerlooper re-threading is done exactly
as diagrammed above. The machine will not oper-
ate properly if the threading is not done in the proper
sequence.
Lowerlooper Easy Threading Operation
(Illustrated on page 21)
(1)Slide the lowerlooper threading lever to the right.
(2)Position the thread under the hook (left end) of the
threading lever.
(3)Place the thread through the eye of the
lowerlooper.
(4) Holding the end of the thread, slide the lowerlooper
threading lever to the left which returns it to its
standard position.
(5)Make sure that the pink triangular marks line up.
CAUTION
When sliding the lowerlooper threading le-
ver to the left, always make sure that the two
pink triangular marks line up as illustrated.
1 Lowerlooper
2 Lowerlooper threading lever
CAUTION
Thread the needles after the lowerlooper
and upperlooper have been threaded.
CAUTION
Slide the threading lever only in the direc-
tions shown by the arrow. Forcefully moving
the threading lever in any other direction
may damage it.
5
Deslice y retenga el botón de liberación de
la tensión del hilo hacia la derecha, y pase
el hilo por el disco de tensión que es el
canal situado al lado del disco de ajuste de
la tensión azul. Suelte el botón.
6
Guíe el hilo por el canal y pase el hilo por
los puntos de enhebrado al lado de las
marcas de color verde siguiendo el orden
numérico de la ilustración hasta la palanca
de enhebrado del áncora inferior.
NOTA:
Si el hilo del áncora inferior se rompe al coser
Antes de volver a enhebrar el áncora inferior,
asegúrese de que el enhebrado se haya realiza-
do tal como se enseñó en el diagrama arriba. La
máquina no funcionará correctamente si no está
enhebrada en el orden apropiado.
Proceso simple de enhebrado del áncora inferior
(Se ilustra en la página 21)
(1)Deslice la palanca de enhebrado del áncora
inferior hacia la derecha.
(2)Coloque el hilo debajo del corchete (extremo
izquierdo) de la palanca de enhebrado.
(3)Pase el hilo por el ojo del áncora inferior.
(4)Mientras sujete el extremo del hilo, deslice la
palanca de enhebrado del áncora inferior hacia la
izquierda para que vuelva a su posición normal.
(5)Asegúrese de que las marcas en forma de trián-
gulo rosadas queden bien alineadas.
PRECAUCIONES
Al deslizar la palanca del áncora inferior
hacia la izquierda, asegúrese siempre que
las dos marcas triangulares rosadas coinci-
dan como se ilustra.
1
Ancora inferior
2
Palanca del áncora inferior
PRECAUCION
Enhebre siempre las agujas después de
haber enhebrado las áncoras superior e in-
ferior.
PRECAUCION
Deslice la palanca de enhebrado sólo en las
direcciones mostradas por la flecha. Si mue-
ve a la fuerza la palanca de enhebrado en
cualquier otra dirección, podría dañarla.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother 1034D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1034D in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother 1034D

Brother 1034D User Manual - German - 36 pages

Brother 1034D User Manual - Dutch, French - 68 pages

Brother 1034D User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info