684070
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Safety directions
Please follow all safety directions and instructions
found in both these Instructions for Use and in all
other sets of instructions supplied with the e-Bike.
Not following these safety directions and instruc-
tions can lead to electric shocks, fires and/or seve-
re injuries.
Keep these Instructions for Use safe for future refe-
rence.
The term “battery pack” used in these Instructions for
Use equally relates to downtube-mounted battery
packs, rack-mounted battery packs and frame-integ-
rated battery packs.
Never open the drive unit. It is maintenance-free and
may only be repaired by qualified experts using only
original spare parts.
This ensures the safety of the drive unit. All war-
ranty claims are invalidated if the drive unit has
been opened without authorization.
All components forming part of the e-Bike System
and parts fitted to the drive unit (e.g. chain ring,
mounting of chain ring, pedals) may be replaced only
by components approved by the manufacturer of the
e-Bike.
This protects the drive unit from damage(e.g. due
to overloading).
Remove the battery pack(26) from the e-Bike before
working on it(e.g. when fitting, servicing or working
on the chain etc.), transporting it or placing it in sto-
rage.
There is a risk of injury if the e-Bike System is acti-
vated by mistake.
The push-assist may only be used when the e-Bike is
pushed.
There is a risk of injury if the wheels of the e-Bike
are not in contact with the ground when the push-
assist is used.
Do not make any alterations at all to your e-Bike Sys-
tem. On no account attempt to improve the perfor-
mance of your e-Bike System.
If you do so, you will shorten the service life of its
components and run the risk of damaging both the
e-Bike System and the e-Bike itself. Furthermore,
the warranty and any warranty claims will be invali-
dated if there has been any type of manipulation of
the e-Bike System. Incorrect handling of the e-Bike
System also endangers both your own health and
that of other road users. By making your own alte-
rations to the e-Bike System, you run the risk
of high personal liability costs or even criminal
prosecution in the event of accidents due to
manipulation.
Please follow all national regulations relating to the
licensing and use of e-Bikes.
Please read and follow the safety directions and inst-
ructions in the Instructions for Use of the battery
pack (26) and in the Instructions for Use of your
e-Bike.
Use for the intended purpose
The drive unit is intended solely for powering your
e-Bike and may not be used for any other purposes.
Key to illustrations
All illustrations are diagrammatical and hence may differ
in some details from your e-Bike.
Fig. Explanation
1 Drive unit with design covers and fitted cranks
Operation
For information on operating the Brose e-Bike System,
please refer to the section on the display and control
unit(see „Display and control unit“ on page10).
N.B.: The Brose e-Bike System only operates when the
display unit(1) has been inserted.
Cycling instructions and tips
When does the e-Bike drive operate?
The Brose e-Bike System permits electric motor assis-
tance of the cyclist in a Pedal Electric Cycle(PEDELEC).
This assistance depends on the force applied to the
pedals by the cyclist. Assistance by the e-Bike drive is
therefore only provided when the cyclist is pedaling.
This applies regardless of the assist level.
The e-Bike drive switches off automatically at speeds of
more than 25km/h. If the speed drops below 25km/h,
the assist switches back on automatically.
An exception to this is the push-assist function, in
which the e-Bike can be pushed more comfortably at
low speed without pedaling. When the push-assist is
used, the pedals can also turn.
You can also use the e-Bike at any time like a normal
bike, without assistance, either by switching off the
e-Bike System or setting the assist level to “OFF”(see
„Setting the assist level“ on page 12). The same ap-
plies when the battery pack(26) is flat.
Drive unit
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose e-Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose e-Bike in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brose e-Bike

Brose e-Bike User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info