780273
13
Zoom out
Zoom in
Previous page
1/26
Next page
13
1) Overview of the Comfort control unit
Switch the pedelec on and off at the Comfort
control unit. Use the two keys and the joystick
to activate and control support from the electric
motor or switch on the headlights.
The Comfort control unit‘s display shows the
current driving speed. You can also see which
support level is active, how long the power for the
support motor will last, the charge level of the bat-
tery and whether the light is switched on. You can
also view the trip kilometers, average speed and
maximum speed for the current tour. The Comfort
control unit also displays the total mileage of the
pedelec and the maximum speed over the entire
distance.
2) Mounting the Comfort control unit
Check the fastening screws at regular intervals.
Shocks, heat and cold may cause the screws to
loosen. Tighten all screws to the required torque.
The Comfort control unit can be mounted on the
left or right handlebar side. The protruding page
faces inwards. It is not above the handlebar grips.
Position the control unit close to the handle. All
keys must be easy to operate with your thumb.
1. Unscrew the hexagon socket screw with a
hexagon socket SW 2.5 on the bracket of the
control unit. Open the mounting bracket.
2. Position the control unit on the left-hand side of
the handlebar.
3. Position the connecting cable in the control
unit bracket. It must lie in the guide troughs on
the inside of the bracket and be guided through a
recess in the bracket to the con-nection.
4. Close the bracket. Pay attention to the
connecting cable. The connecting cable must not
be crushed by the bracket.
5. Turn the hexagon socket screws on the bracket
back in with a hexagon socket SW 2.5. Do not
tighten the screws yet.
Check the position of the Comfort control unit.
Are all keys accessible with the thumb? Is the
advertisement clearly visible?
6. Tighten the hexagon socket screw with the
hexagon socket (min. torque 0.3 Nm, max. torque
0.5 Nm).
7. Connect the purple plug of the control unit to
the socket of the same color on the wiring harn-
ess. Ensure that the cut-outs in the plug and so-
cket meet so as not to damage the connection.
The Comfort control unit is installed.
3) Operating and display elements
Use the keys on the Comfort control unit to
regulate the functions of the pedelec system
ergo-nomically. The hand can remain on the
handlebar grip, while the thumb can operate the
keys on the Comfort control unit. The displays on
the control unit display provide information about
the driving situation and the support aids.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose Bristol E-Touring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose Bristol E-Touring in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info