368294

Brondi fx 400 twin Manual

9
Zoom out
Zoom in
Previous page
1/48
Next page
- 9 -
3.12 Setting the Key Tone ON or OFF
This feature allows the FX-400 to emit a confirmation tone after pressing each button.
a. Press the MENU button 11 times, “ON” flashes on the LCD Screen.
b. Press the UP or DOWN button (“ON” will be displayed on the LCD screen) or
deactivate (“OFF” will be displayed on the LCD screen) the key tone feature.
c. Press the PTT button to confirm your setting.
3.13 Setting the Dual Watch Mode
Your FX-400 is capable of monitoring two channels, the current and another (dual watch)
channel. If the unit detects a signal on either channel, it will stop and receive the signal.
a. Press the MENU button 12 times, “DCM” will be displayed while “OF” flashes on
the LCD Screen.
b. Press the UP or DOWN button to select the Dual Watch channel (1-8, except the
current channel).
c. Press the MENU button to change the CTCSS code.
d. Press the UP or DOWN button to select the desired CTCSS code (1-38)
e. Press the MENU button to change the DCS code.
f. Press the PTT button to confirm your setting.
g. Press the PTT button to exit.
4. Auxiliary Features
4.1 Key Lock
The Key Lock feature allows user to disable the UP, DOWN and MENU buttons so
that the FX-400 settings could not be changed accidentally.
a. To activate the Key Lock feature, press and hold the MENU button until“ ”
appears on the LCD Screen.
b. To deactivate the key Lock feature, press and hold the MENU button until“ ”
disappears on the LCD Screen.
The PTT and POWER buttons will remain functional even if the Key Lock feature is
activated.
4.2 LCD Screen Back Light
Every time a button is pressed (except PTT and CALL button), the LCD Screen
back light will illuminate for 5 seconds.
4.3 Microphone/Earphone/Charge Jack
The FX-400 is equipped with an auxiliary such as Mic/earphone, and charge jack
which is located at the opposite side of the PTT button.
4.4 Shoulder Mic
The FX-400 is designed and capable to use the Shoulder Mic accessory. To
activate this kind of accessory.
a. Insert the round connector in the FX-400 Mic/Earphone/Charge jack. (Be sure
your FX-400 is turn on and have the same channel with other PMR).
b. Press and hold the PTT button on the right side while speaking. To stop
conversation release the PTT button and you are now in receive mode.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brondi fx 400 twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brondi fx 400 twin in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info