Manual Brondi FX 100 trio (page 18 of 99) (English, German, French, Spanish)

497301

Zoom out

Zoom in

1/99

NOTE: If no button is pressed for 6 seconds during programming,

the handset will automatically return to stand-by and the

changes will be conﬁ rmed.

6.3 COMMUNICATE: RECEIVING AND TRANSMITTING

To transmit or receive, all the handsets must be tuned into the

same channel and the same CTCSS code.

RECEIVING

When your handset is on and in stand-by, it is always ready to

receive communications which you will hear through the speaker.

At the end of every reception you will hear a “roger beep” meaning

that your contact is ready to receive your communication. When

receiving, the display will show the receiving symbol

ATTENTION: You cannot receive communications when the PTT

communication or CALL buttons are pressed, even if you are not

speaking.

CONTROLLING THE SPEAKER AND TUNE VOLUME

It is possible to set the speaker volume by pressing the + and -

buttons:

• press the + button to increase the volume;

• press the - button to decrease the volume.

Every time you select a volume level, the handset will issue a

beep and the display will show the level with a series of bars. The

level set will always be visible on the display.

TRANSMITTING

Transmission can only take place while the PTT communication

button is pressed, unless the VOX function is active.

1. Before starting communication check that channel is free, i.e.:

there is no receiving signal on the display .

2. Press the PTT communication button and hold it down and the

transmission symbol will appear on the display.

3. Speak into the microphone from a distance of 15 centimetres.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brondi FX 100 trio in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brondi FX 100 trio Manual

Product: