Manual Brondi BRAVO CORDLESS 2 (page 11 of 72) (English, German, French, Spanish)

567497

Zoom out

Zoom in

1/72

6. OPERATIONAL FUNCTION

Introduction

When your cordless is in standby mode, i.e. no calls or operations are being made, the heading

“HS-1” appears on the display (the number identifying the cordless).

6.1 TO ANSWER A CALL

• When you receive a call, both handset and base start ringing, the

symbol appears on the

display, and both the red led on the handset locator button and the big white led on the

phone base start ﬂ ashing.

If your cordless is directly connected to the telephone line (not via PABX) and the Caller

Details Service has been activated by your server, the caller’s telephone number (if available)

appears on the display.

• Press the

button to answer the call, the symbol will come up steadily on the display and

the base red led will ﬂ ash.

• To end a call, press again the

button, or alternatively replace the handset back in the

base. The display symbol and the base red led disappear.

6.2 MAKING CALLS (MANUAL SELECTION)

• Press

button.

• The symbol

appears steadily on the display and the base red led starts ﬂ ashing.

• Check that the dial tone is present then key in the number.

• The dialled number appears on the display.

• To end the call, press again the

button or alternatively replace the handset back in the

base.

6.3 SPEAKERPHONE

To activate the speakerphone, press the

button when the handset is idle or after having

pressed the button.

The speakerphone is active if you can hear the caller voice coming from the speaker and can

see the

and symbols on the display

(hold repeatedely the Volume button to adjust

the speaker volume). To switch back to standard from a spekerphone call, just press brieﬂ y the

button.

6.4 PRE-SELECTION

• When handset is idle key in up to 25 digits.

• You can check the digit on the display before starting your call.

• If you make a mistake, press shortly the DEL button to clear digits one by one from the display;

to clear all digits, press and hold the DEL button.

• When number is checked, press the

button to start the call.

• At this point digits are selected and dialled.

• To end the call, press the

button again, or replace the handset back in the base.

Note: If you have a PABX connection you need to pause for a few seconds between dialing the

system code and the actual phone number.

To pause, press the button and a dash “-” will appear on the display.

BRAVO CORDLESS-2-lingue 6-09-2005, 16:0911

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brondi BRAVO CORDLESS 2 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brondi BRAVO CORDLESS 2 Manual

Product: