Manual BroilKing Smoke Vertical Propane Smoker (page 5 of 36) (English, French, Spanish)

637994

Zoom out

Zoom in

1/36

OPD EQUIPPED CYLINDER HOSE & REGULATOR

OVERFILL PREVENTION DEVICE

1. The standard for outdoor gas appliances, ANSI

Z21.58/CAN/CGA-1.6, requires that appliances are to be used

with cylinders equipped with an Overfill Prevention Device

(OPD).

2. The OPD is designed to reduce the potential for the overfilling

of propane cylinders, thus reducing the possibility of relief

valve discharges of raw propane. The OPD causes a slower

purge/fill operation. Some consumers have been advised by

filling stations that these cylinders are “defective”. This is not

a defect. Some propane filling stations may not be aware of

this device and its effect on the purge/fill operation.

3. New OPDs coming onto the market have technology that

allows for much greater BTU outputs which will decrease the

amount of time it takes to purge a cylinder.

IDENTIFICATION

To identify these cylinders, the OPD handwheel has been

standardized to the shape shown.

1. All models are equipped with a hose and regulator with a QCC

-1

Quick Closing Coupling.

2. The QCC

coupling contains a magnetic Flow Limiting Device

which will limit the flow of gas should there be a leak between the

regulator and the appliance valve. This device will activate if the

cylinder valve is opened while the appliance valves are open. Be

sure the appliance valves are off before the cylinder valve is

opened to prevent accidental activation.

3. The QCC

coupling incorporates a heat sensitive hand wheel

that will cause the back check module in the QCC

cylinder

valve to close when exposed to temperatures between 240° and

300°F. Should this occur, do not attempt to reconnect the hand

wheel. Remove hose/regulator assembly and replace with a new

one.

4. The pressure regulator is set at 11 inches WC (water column)

and is for use with LP gas only. The hose and hose couplings

comply with CGA Standard CAN 1.83. No modifications or

substitutions should be attempted.

5. Protect the hose from dripping grease and do not allow the

hose to touch any hot surface, including the base casting of

the barbecue.

6. Inspect the seal in the QCC

cylinder valve when replacing the

LP gas cylinder or once per year whichever is more frequent.

Replace the seal if there is any indication of cracks, creases, or

abrasion.

7. Inspect the hose before each use of the barbecue. If the hose is

cracked, cut, abraded or damaged in any way, the appliance

must not be operated.

8. For repair or replacement of the hose/regulator assembly,

contact customer service at 1-800-265-2150 or

info@omcbbq.com

CONNECTION

1. Be sure cylinder valve and appliance valves are "off".

2. Place full LP gas cylinder in LP tank well and secure base as per

assembly instructions.

3. Center the nipple in the cylinder valve and hold in place. Using

other hand, turn the hand wheel clockwise until there is a

positive stop. Do not use tools. Hand tighten only. When

making the connection, hold the regulator in a straight line

with the cylinder valve, so as not to cross thread the

connection.

4. Leak test connections. See "Leak Testing".

5. Refer to lighting instructions. To avoid activating the Flow

Limiting Device when lighting, open cylinder valve slowly

with the appliance valves off. If the Flow Limiting Device is

accidentally activated, turn off cylinder valve and appliance

valves, wait 10 seconds to allow the device to reset, open

cylinder valve slowly, then open the appliance valve.

DISCONNECTION

Always close LP cylinder valve and remove coupling nut before

moving cylinder from specified operation position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BroilKing Smoke Vertical Propane Smoker in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BroilKing Smoke Vertical Propane Smoker

BroilKing Smoke Vertical Propane Smoker Installation Guide - English, French, Spanish - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BroilKing Smoke Vertical Propane Smoker Manual

Product: